Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Feldbinder › HEUT 40.4

Feldbinder HEUT 40.4

Built: 2008-2011 · Series: HEUT

More machines from model year 2008

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Feldbinder HEUT 40.4 is a machine built by Feldbinder. Production: 2008-2011. The machine is 10,407.5 mm long and 2,550 mm wide. The unladen weight is 7,260 kg. The gross vehicle weight is 40,500 kg. Unladen weight across the Feldbinder range ranges from 3,800 to 10,280 kg; the HEUT 40.4 sits in the middle of that range with 7,260 kg. Its immediate neighbours are the TSA33.3 below it with 7,200 kg and the EUT 38 3 above it with 7,280 kg. 133 Feldbinder models are on record.

Feldbinder HEUT 31.3 – O4-class silo and bulk-goods semi-trailer, built 1999 to 2010: 27,000 kg gross weight, 21,100 kg payload.

Feldbinder is a German manufacturer of silo and tank semi-trailers for transporting bulk goods and liquids. The HEUT range belongs to the silo vehicles for dusty or granular goods used in the construction, feed and food industries. The registered HEUT 31.3 version dates from build years 1999 to 2010.

Read on 3 more paragraphs

With a gross weight of 27,000 kg, the HEUT 31.3 sits in EU trailer class O4. With an unladen weight of 5,900 kg, payload comes to 21,100 kg. At 9.91 m long, 2.55 m wide and with a 5.87 m wheelbase, the body is built around a cylindrical or multi-chamber silo volume emptied via pneumatic or mechanical discharge equipment.

Silo vehicles of this size run on air brakes and require licence category C1E or CE for towing in the EU. The design allows dust-tight, weather-independent transport and is built for fast loading and unloading using compressed air, a key difference from open tippers or curtain-sided trailers.

When buying a used silo vehicle, check the inner walls for corrosion caused by aggressive bulk goods, check the discharge flaps and seals for wear, check the compressed-air system used for unloading for leaks, and check the axles and brakes for even wear under frequently changing loads. Given the wide production span of this type, it is also worth confirming which generation of discharge fittings the individual unit carries, since parts availability can differ between them.

Sources: SpecCodex-Register: Kennwerte des Modells Feldbinder HEUT 31.3, Feldbinder, Zulassungsdaten RDW (Niederlande)

Technical data

Dimensions and weights

Length10,407.5 mmcorrect
Width2,550 mmcorrect
Unladen weight7,260 kgcorrect
Gross vehicle weight40,500 kgcorrect

Frequently asked questions

How much does the Feldbinder HEUT 40.4 weigh?

The unladen weight is 7,260 kg.

What is the gross vehicle weight of the Feldbinder HEUT 40.4?

40,500 kg.

What are the dimensions of the Feldbinder HEUT 40.4?

10,408 mm × 2,550 mm.

When was the Feldbinder HEUT 40.4 built?

Production years: 2008-2011.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare