Technical register for agricultural, construction and commercial machinery · sourced data
Start › Military & special vehicles › Faw › Other models › Jiefang CA-30

Faw Jiefang CA-30

Built: 1958-1979 · Series: Other models

More machines from model year 1958

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Faw Jiefang CA-30 is a machine built by Faw. Production: 1958-1979. The engine delivers 95 hp (70.8 kW). The machine is 6,680 mm long, 2,310 mm wide and 2,740 mm high. The unladen weight is 5,340 kg. The fuel is l. Rated output within this group ranges from 16 to 1,500 hp; the Jiefang CA-30 sits at the bottom of that range with 95 hp. Its immediate neighbours are the WC below it with 92 hp and the Gama Goat above it with 101 hp. Rated output within this group ranges from 4 to 1,103 kW; here the Jiefang CA-30 sits at the bottom of that range with 70.8 kW. 3 Faw models across 3 series are on record.

Jiefang CA-30 from the Chinese manufacturer FAW – off-road truck modelled on a Soviet design, with a 5.6-litre diesel engine rated at 71 kW and a weight of 5,340 kg, built 1958 to 1979

FAW (First Automobile Works) is a Chinese state-owned group based in Changchun. The Jiefang CA-30 was built between 1958 and 1979 as an off-road truck modelled on the Soviet ZIL-157 and served the Chinese military and post-war reconstruction programmes as a rugged transport vehicle.

Read on 3 more paragraphs

The CA-30 is powered by a diesel engine with a displacement of 5.6 litres, rated at 71 kW. The vehicle is 6.68 m long, 2.31 m wide and 2.74 m high, and it weighs 5,340 kg. This combination of a large-displacement diesel engine with moderate output is typical of early off-road trucks designed for durability and pulling power rather than high road speed.

The CA-30 belongs to the class of off-road multi-axle trucks with driven front and rear axles, as laid down by the Soviet ZIL-157 model it followed. Vehicles of this type carried troops, materiel and equipment along unpaved roads and across the terrain beyond them. Present-day civilian EU truck classes and emissions stages cannot be applied to a Chinese military vehicle of this build period.

When buying a used Jiefang CA-30, frame and cab corrosion after decades of service matters, along with the condition of the front axle and its drive components, since these carry more strain on a multi-axle truck than on one with rear-axle drive alone, the function of the diesel engine's mechanical injection pump, and the availability of spare parts, which outside China can practically only be sourced through collectors of historic military vehicles.

Sources: SpecCodex-Register: Kennwerte des Modells Jiefang CA-30

Technical data

Engine

Engine5, 6 L Diesel (90 PS)correct
Fuellcorrect
Power95 hp (70.8 kW)correct

Dimensions and weights

Length6,680 mmcorrect
Width2,310 mmcorrect
Height2,740 mmcorrect
Unladen weight5,340 kgcorrect

Where this model stands

Power-to-weight ratio: 13.3 kW/t (71 kW / 5.3 t)

Stronger than 24% of the military & special vehicles in the register — out of 103 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Faw Jiefang CA-30 have?

The Faw Jiefang CA-30 delivers 95 hp.

How much does the Faw Jiefang CA-30 weigh?

The unladen weight is 5,340 kg.

What are the dimensions of the Faw Jiefang CA-30?

6,680 mm × 2,310 mm × 2,740 mm.

When was the Faw Jiefang CA-30 built?

Production years: 1958-1979.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Wikipedia (retrieved August 2026) · How we check the data

Fire appliance in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare