Technical register for agricultural, construction and commercial machinery · sourced data

Tadano Faun ATF 70G-4

Built: 2015-2021 · Series: ATF

More machines from model year 2015

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The ATF series from Tadano Faun includes the ATF 70G-4. Production: 2015-2021. The engine delivers 320 kW, has 6 cylinders, with a displacement of 11,946 cm³. The machine is 12,850 mm long and 2,660 mm wide. The unladen weight is 47,750 kg. The wheelbase measures 5,400 mm. Top speed is 85 km/h. The gross vehicle weight is 48,000 kg. The machine runs on 8 wheels. The ATF series covers 11 models. Rated output within it ranges from 260 to 480 kW; the ATF 70G-4 sits in the lower part of that range with 320 kW. Its immediate neighbours are the ATF 60G-3 below it with 260 kW and the ATF above it with 390 kW. Unladen weight within it ranges from 35,750 to 71,910 kg; here the ATF 70G-4 sits in the lower part of that range with 47,750 kg. 17 Tadano Faun models across 3 series are on record.

Tadano Faun ATF – all-terrain cranes built in Germany: six- and eight-cylinder engines from 260 to 480 kW, lifting chassis at gross weights from 36 to 86.4 tonnes

ATF stands for All Terrain Faun and denotes Tadano Faun's mobile-crane range, tracing back to the crane maker Faun, founded in 1863 in Lauf an der Pegnitz; after its takeover by the Japanese Tadano group in 2007, the plant has traded as Tadano Faun. Model designations such as ATF 220G-5 state lifting capacity in tonnes (220 t) and generation (G-5), while EM4 marks a version with a four-axle carrier for road transport without a special permit.

Read on 3 more paragraphs

The register lists 13 versions with six- and eight-cylinder engines from 260 to 480 kW and 7,201 to 15,928 cm³, kerb weights from 35,750 to 71,910 kg, gross vehicle weights from 36,000 to 86,400 kg, lengths from 11,510 to 17,900 mm and widths from 2,550 to 3,000 mm.

All-terrain cranes such as the ATF range combine road registration with full off-road capability and are used on construction sites, in plant engineering and for wind-turbine erection; Tadano Faun's main rival there is Liebherr, whose plant in Ehingen lies only a few hundred kilometres away, alongside Grove.

When buying used, check operating hours and service records for the hoist and telescopic boom, the condition of the outrigger cylinders, hydraulic system tightness, and on multi-axle carriers tyre condition and axle steering; the electronic load-moment limiter is worth checking for stored fault codes. Parts and service run through the Tadano service network.

Sources: SpecCodex register, model data: Tadano Faun ATF, Tadano (manufacturer)

Technical data

Engine

Power320 kWcorrect
Cylinders6correct
Displacement11,946 cm³correct

Dimensions and weights

Length12,850 mmcorrect
Width2,660 mmcorrect
Wheelbase5,400 mmcorrect
Unladen weight47,750 kgcorrect
Gross vehicle weight48,000 kgcorrect

Drivetrain and chassis

Wheels8correct
Top speed85 km/hcorrect

Where this model stands

Power-to-weight ratio: 6.7 kW/t (320 kW / 47.8 t)

Stronger than 71% of the mobile & rough terrain cranes in the register — out of 723 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Tadano Faun ATF 70G-4 have?

The Tadano Faun ATF 70G-4 delivers 320 kW.

How much does the Tadano Faun ATF 70G-4 weigh?

The unladen weight is 47,750 kg.

What is the gross vehicle weight of the Tadano Faun ATF 70G-4?

48,000 kg.

What engine does the Tadano Faun ATF 70G-4 have?

6 cylinders, 11,946 cm³ displacement.

How fast does the Tadano Faun ATF 70G-4 go?

Top speed is 85 km/h.

What are the dimensions of the Tadano Faun ATF 70G-4?

12,850 mm × 2,660 mm.

When was the Tadano Faun ATF 70G-4 built?

Production years: 2015-2021.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 4 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Mobile crane in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare