Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Farmer › Other models › F-10244 C1

Farmer F-10244 C1

Built: Year not documented · Series: Other models

Source: farmer.pl

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the F-10244 C1, Farmer offers a model from the Pozostałe modele series. The engine delivers 105 hp (77.2 kW), has 4 cylinders, with a displacement of 4,750 cm³. The machine is 4,217 mm long, 1,980 mm wide and 2,773 mm high. The unladen weight is 4,430 kg. Ground clearance is 470 mm. The tank holds 125 litres. Tyres: front 380/70R24, rear 18,4R34. Rated output across the Farmer range ranges from 61 to 105 hp; the F-10244 C1 sits at the top of that range with 105 hp. Its immediate neighbours are the F-9258TE below it with 86 hp. Rated output across the Farmer range ranges from 61 to 105 hp; here the F-10244 C1 sits at the top of that range with 105 hp. 11 Farmer models across 2 series are on record.

Farmer – other models: the collective page of the F, F2 and F4 ranges from F-8244 to F4-7258, 45 to 77 kW, four-cylinder diesels of 4.5 to 4.8 litres

This page gathers tractors carried in the register under the designation Farmer, without a manufacturer that can be assigned with certainty. The type designations follow a pattern of letters and numbers: F, F2 and F4 as a prefix, a four-digit number and suffixes such as C1, C2, TE or PE – for example F-10244 C1, F-9258 TE or F4-7258. Two models additionally carry the preceding brand name FARMER (FARMER F-9258 TE, FARMER F2-8248 PE).

Read on 3 more paragraphs

The register lists 9 versions with 45 to 77.2 kW from four-cylinders of 4,525 to 4,750 cm³, unladen weights of roughly 3,470 to 4,430 kg, a gross weight of 7,000 kg, lengths from 3,850 to 4,217 mm and widths from 1,925 to 2,444 mm.

With four-cylinder diesels of 4.5 to 4.8 litres and outputs of roughly 60 to just over 100 hp, the Farmer models sit in the classic mid-range of agricultural tractors used for tillage, trailer work and PTO tasks in mixed arable farming. The parallel F, F2 and F4 ranges with similar engine data point to different equipment or drive variants within a shared platform.

On used tractors of this class, operating hours and the condition of the four-cylinder diesel count, along with the tightness of the injection system, the condition of clutch and gearbox, wear on the front axle and steering, and corrosion on sheet metal and mudguards. On the TE and PE versions it is also worth checking the PTO and hydraulic connections, which differ by equipment variant.

Sources: SpecCodex register, model data: Farmer (weitere Modelle)

Technical data

Engine

Power105 hp (77.2 kW)correct
Cylinders4correct
Displacement4,750 cm³correct

Dimensions and weights

Length4,217 mmcorrect
Width1,980 mmcorrect
Height2,773 mmcorrect
Ground clearance470 mmcorrect
Unladen weight4,430 kgcorrect

Drivetrain and chassis

Front tyres380/70R24correct
Rear tyres18, 4R34correct

Working data

Fuel tank capacity125 lcorrect

Where this model stands

Power-to-weight ratio: 17.4 kW/t (77 kW / 4.4 t)

Power class: Large (100–180 hp)

Stronger than 69% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Farmer F-10244 C1 have?

The Farmer F-10244 C1 delivers 105 hp.

How much does the Farmer F-10244 C1 weigh?

The unladen weight is 4,430 kg.

What engine does the Farmer F-10244 C1 have?

4 cylinders, 4,750 cm³ displacement.

What are the dimensions of the Farmer F-10244 C1?

4,217 mm × 1,980 mm × 2,773 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare