StartTractorsFarmall › McCormick Farmall 130 High Clearance

Farmall McCormick Farmall 130 High Clearance

Built: 1956-1958 · Series: McCormick Farmall

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Farmall McCormick Farmall 130 High Clearance is a tractor from the McCormick Farmall series, built in 1956-1958. It runs on a four-cylinder engine. Rated speed is 1,400 rpm.

Power is transmitted through a sliding gear gearbox, drive type: 2-WD.

It runs on petrol; the engine is water-cooled. As standard, it runs on 4.00-19 4-ply tyres at the front and 9-36 4-ply at the rear. This model followed the Farmall 100 High Clearance, before the Farmall 140 High Clearance took over.

Technical data

Engine

Engine makeInternationalcorrect
Engine modelC-123correct
Fuelpetrolcorrect
Power22 belt, 20 drawbar hpcorrect
Rated speed1,400 rpmcorrect
Cylinders4correct
Displacement123 cicorrect
Bore3.125"correct
Stroke4"correct
Naturally aspiratednaturally aspiratedcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length115"correct
Width61"correct
Height72"correct
Wheelbase72"correct
Turning circle17.5 ftcorrect
Unladen weight2,800 lbcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearboxsliding-gear transmissioncorrect
Gearbox makeInternationalcorrect
Forward gears4correct
Reverse gears1correct
Front tyres4.00-19 4-plycorrect
Rear tyres9-36 4-plycorrect

Working data

Fuel tank capacity11 galcorrect
Linkage category"Fast-Hitch" 2-pointcorrect

Origin and approval

PlantTractor Works, Chicago, Illinois, USA; Louisville, Kentucky, USAcorrect
PredecessorFarmall 100 High Clearancecorrect
SuccessorFarmall 140 High Clearancecorrect

Frequently asked questions

What engine does the Farmall McCormick Farmall 130 High Clearance have?

4 cylinders, gasoline.

When was the Farmall McCormick Farmall 130 High Clearance built?

Production years: 1956-1958.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 33 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare