Fahr D47
Built: 1971-1980 · Series: Other models
The Fahr D47 rolled off the line in 1971-1980 as a tractor. It is powered by a two-cylinder engine producing 35 kW.
It runs on diesel; the engine is air-cooled. Within the range, rated power spans from 8.8 to 123 kW; with 35 kW, the D47 sits in the upper third. Directly alongside are the D45 L with 34 kW below and the D66F with 59 kW above.
Technical data
Engine
| Engine make | Deutzcorrect |
|---|---|
| Engine model | F2L1114; F2L2114correct |
| Fuel | dieselcorrect |
| Power | 47 hp (35 kW)correct |
| Cylinders | 2correct |
| Turbocharger | nocorrect |
| Cooling | air-cooledcorrect |
Drivetrain and chassis
| Drive | rear-wheel driveWDcorrect |
|---|
Origin and approval
| Plant | Buenos Aires, Argentinacorrect |
|---|---|
| Successor | not statedcorrect |
Frequently asked questions
How much power does the Fahr D47 have?
The Fahr D47 delivers 47 hp.
What engine does the Fahr D47 have?
2 cylinders, Diesel.
When was the Fahr D47 built?
Production years: 1971-1980.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.