Fahr D177V
Built: 1961-1966 · Series: Other models
More machines from model year 1961
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Built in 1961-1966, the Fahr D177V is a tractor from Fahr. It is powered by a four-cylinder engine producing 27 kW.
It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 8.8 to 123 kW; with 27 kW, the D177V sits in the mid-field. Directly alongside are the D 270 B with 23.6 kW below and the D45 L with 34 kW above.
Technical data
Engine
| Engine make | Mercedes-Benzcorrect |
|---|---|
| Engine model | OM 636 VIcorrect |
| Fuel | dieselcorrect |
| Power | 36 hp (27 kW)correct |
| Cylinders | 4correct |
| Turbocharger | nocorrect |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | rear-wheel driveWDcorrect |
|---|---|
| Clutch | drycorrect |
Origin and approval
| Plant | Villa Insuperable, Buenos Aires, Argentinacorrect |
|---|---|
| Successor | not statedcorrect |
More machines with this engine (Mercedes-Benz OM 636 VI, 2)
Frequently asked questions
How much power does the Fahr D177V have?
The Fahr D177V delivers 36 hp.
What engine does the Fahr D177V have?
4 cylinders, Diesel.
When was the Fahr D177V built?
Production years: 1961-1966.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.