Expandable ECC 1150 – specifications
Built: 2025 · Series: Other models
Data for the version built 2025 · Data origin: Official register · sources
More machines from model year 2025
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Expandable – other models: the collective page of extendable low-loader semi-trailers outside the named ranges, from E03 to EOH3.6, 6,040 to 29,680 kg kerb weight, 15 to 42 t gross weight, 2.55 m width
This page gathers the Expandable semi-trailers the register could not assign to a named range. The brand name describes the basic principle: extendable low-loader semi-trailers for long and awkward loads. The type designations E03, EO3 and EOH3 with the suffixes .1, .3, .5 and .6 mark build stages and axle count of the same base range, alongside the types E13H, E13T, ECC 1150 and EXP 1.
Read on 3 more paragraphs
The register lists 13 versions here with a kerb weight of 6,040 to 29,680 kg and a gross weight of 15,000 to 42,000 kg, at lengths of 12,670 to 13,750 mm and a constant width of 2,550 mm.
Extendable low-loaders of this kind carry long components such as rotor blades, bridge girders, pipes or construction machinery, where the load length exceeds the vehicle length, which is why the frame is built telescopically. The constant width of 2.55 m matches the maximum width allowed on EU roads without a special permit.
Buying a used Expandable trailer calls for particular attention to the mechanics of the extending frame: the running surfaces of the telescopic rails, the locking in the extended positions and any play when extended. Add to that the usual checks for heavy semi-trailers – axle units, braking system, kingpin and fifth-wheel plate, frame and welds for cracks, and the hydraulics of the support legs. Parts and repairs for this specialist build run mainly through the manufacturer or workshops specialising in heavy semi-trailers.
Sources: SpecCodex register, model data: Expandable (weitere Modelle)
Technical data
Dimensions and weights
| Width | 2,550 mmcorrect |
|---|---|
| Unladen weight | 6,040 kgcorrect |
| Gross vehicle weight | 42,000 kgcorrect |
Drivetrain and chassis
| Wheels | 12correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Expandable ECC 1150 weigh?
The unladen weight is 6,040 kg.
What is the gross vehicle weight of the Expandable ECC 1150?
42,000 kg.
Up to what speed is the Expandable ECC 1150 approved?
Approved up to 100 km/h.
When was the Expandable ECC 1150 built?
Production years: 2025.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
