Excalibur Equipment, LLC Gregory RS6EX
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Excalibur Equipment, LLC Gregory RS6EX is a forklift truck made by Excalibur Equipment, LLC.
At 8 km/h, that is as fast as it goes. In service, it weighs 2,238 kg. It carries 2,722 kg.
Excalibur Equipment, LLC – other models: the collective page of Gregory electric forklifts outside the named ranges, from RC3EX to RSC8EX, 2,102 to 6,586 kg unladen weight, electric drive throughout
This page gathers the electric forklifts sold under the Gregory brand by Excalibur Equipment, LLC, which the register could not assign to a named range: the RC3EX to RR6EX, RS3EX to RS6EX and RSC3EX to RSC8EX families. Excalibur Equipment is a US intralogistics maker building electric forklifts under the Gregory name in various chassis variants; the letter combination before the number marks each vehicle family, the number its size class.
Read on 3 more paragraphs
The register lists here 16 versions with unladen weights of 2,102 to 6,586 kg, lift capacities of 1,361 to 3,629 kg and widths of 1,100 to 1,370 mm, with electric drive throughout.
Such battery-powered forklifts across different families and size classes cover the range from compact narrow-aisle units to heavy counterbalance trucks for warehouse logistics, where emission-free indoor operation and matching to aisle width and load capacity are what matter.
Buying used, on electric forklifts of this kind the battery's condition and charge cycles, mast and hydraulic seals, and wheel tread matter most; parts for the Gregory models run through Excalibur Equipment itself and trade specialising in US intralogistics.
Sources: SpecCodex register, model data: Excalibur Equipment, LLC (weitere Modelle)
Technical data
Engine
| Fuel | Elektrisch (Batterie)correct |
|---|
Dimensions and weights
| Width | 1,230 mmcorrect |
|---|---|
| Unladen weight | 2,238.5 kgcorrect |
Drivetrain and chassis
| Top speed | 7.7 km/hcorrect |
|---|---|
| Turning radius | 2,140 mmcorrect |
| Fork spread | 939.8 mmcorrect |
Working data
| Lifting capacity | 2,721.6 kgcorrect |
|---|---|
| Lift height | 3,240 mmcorrect |
| Lowering speed | 22.9 m/mincorrect |
Other data
| Front wheels | 4correct |
|---|---|
| Lift speed | 16.8 m/mincorrect |
| Load centre | 609.6 mmcorrect |
| Rear wheels | 2correct |
Frequently asked questions
How much does the Excalibur Equipment, LLC Gregory RS6EX weigh?
The unladen weight is 2,238 kg.
How fast does the Excalibur Equipment, LLC Gregory RS6EX go?
Top speed is 7.7 km/h.
What is the load capacity of the Excalibur Equipment, LLC Gregory RS6EX?
Load capacity is 2,722 kg at a 610 mm load centre, lift height 3,240 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · How we check the data
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.
