Eurostar 4040 4WD – specifications
Series: Other models
Build year not documented · Data origin: Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Eurostar 4040 is a four-wheel-drive tractor belonging to the category of agricultural utility vehicles. This model is manufactured by Eurostar and represents a specific series within the tractor segment. The design is based on a three-cylinder engine designated SL3105BT, which has a displacement of 2,857.9 cm³. The compact construction is reflected in an overall length of 3,510 mm and a cabin height of 1,752.6 mm. The unladen weight of 1,890 kg defines the static load distribution of the vehicle.
The engine output is 44.6 hp, corresponding to 32.8 kW, and is delivered at a rated speed of 2,400 rpm. This power class is suitable for light to medium field work as well as for transporting mounted implements. The transmission offers eight forward gears and four reverse gears, allowing for differentiated speed adaptation to various soil conditions. The maximum speed is 32 km/h, while the turning radius of 4,510 mm determines maneuverability in confined areas. The PTO power of 36 hp ensures power transmission for attached equipment.
The hydraulic system operates at a pressure of 160 bar and a pump flow rate of 38.6 l/min. The lifting capacity of 2,600 kg defines the maximum load that can be lifted at the rear three-point linkage. The tire sizes of 8.3x20 on the front axle and 12.4x28 on the rear axle are designed for traction in the field. The fuel tank holds 38.2 l, which determines the operating duration between refueling stops. The onboard voltage of 12 V supplies the electrical systems. This configuration positions the tractor as a work machine for specific agricultural tasks.
Eurostar 8040: farm tractor with a turbocharged four-cylinder diesel engine from the Perkins 1004 range, 3,990cc, 83.1 hp and a lift capacity of 2,600 kg
The 8040 is a mid-power farm tractor whose engine, coded 1004.4T, belongs to the Perkins 1004 range – a turbocharged four-cylinder diesel engine used by numerous tractor and construction-machinery makers around the world. This engine family is known for rugged units tuned for pulling power rather than high revs, typical of the mid-power segment of farm tractors.
Read on 3 more paragraphs
The four-cylinder diesel engine of 3,990cc produces 83.1 hp (61.1 kW) at 2,400 rpm. At 3,650 kg and 4,630 mm long, the 8040 sits in the mid-power class of farm tractors; the three-point linkage lifts up to 2,600 kg, and the top speed is 36.4 km/h.
A turbocharged four-cylinder engine of around four litres and about 60 kW covers the power class needed for general arable and grassland work with medium-weight mounted implements. The 2,600 kg lift capacity at the three-point linkage is enough for ploughs, cultivators and medium-sized mounted mowers or harvesting equipment.
When buying one of these tractors second-hand, with an engine from the Perkins 1004 range, the condition of the turbocharger and its oil supply, and the injection pump's delivery accuracy, matter most. Also worth checking are the seals of the lift cylinder, given the comparatively high 2,600 kg lift capacity, and the drivetrain and power take-off for the wear typical of tractors in this power class under continuous use.
Sources: SpecCodex-Register: Kennwerte des Modells 8040
Technical data
Engine
| Engine model | SL3105BTcorrect |
|---|---|
| Power | 44.6 hp (32.8 kW)correct |
| Rated speed | 2,400 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 2,857.9 cm³correct |
| Coolant capacity | 9.1 lcorrect |
| Engine oil capacity | 7.2 lcorrect |
Dimensions and weights
| Length | 3,510 mmcorrect |
|---|---|
| Unladen weight | 1,890 kgcorrect |
Drivetrain and chassis
| Gearbox type | gearcorrect |
|---|---|
| Forward gears | 8correct |
| Reverse gears | 4correct |
| Tyre size | front 8.3x20 rear 12.4x28correct |
| Top speed | 32 km/hcorrect |
| Turning radius | 4,510 mmcorrect |
Working data
| Lifting capacity | 2,600 kgcorrect |
|---|---|
| Pump flow | 38.6 l/mincorrect |
| Hydraulic oil capacity | 10.6 lcorrect |
| Hydraulic pressure | 160 barcorrect |
| Fuel tank capacity | 38.2 lcorrect |
Other data
| Cab height | 1,752.6 mmcorrect |
|---|---|
| PTO output | 36 hpcorrect |
| System voltage | 12 Vcorrect |
Where this model stands
Power-to-weight ratio: 17.4 kW/t (33 kW / 1.9 t)
Power class: Universal (40–100 hp)
Stronger than 28% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Eurostar 4040 have?
The Eurostar 4040 delivers 44.6 hp.
How much does the Eurostar 4040 weigh?
The unladen weight is 1,890 kg.
What engine does the Eurostar 4040 have?
3 cylinders, 2,858 cm³ displacement.
How fast does the Eurostar 4040 go?
Top speed is 32 km/h.
What is the PTO output of the Eurostar 4040?
PTO output is 36 hp.
How much does the rear linkage of the Eurostar 4040 lift?
The rear linkage lifts 2,600 kg.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · Data sources and cross-checks
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.