Eschlböck Victor
Built: 2024 · Series: Other models
More machines from model year 2024
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Eschlböck Victor – a heavy forestry machine from the Austrian manufacturer Eschlböck: six-cylinder engine of 16,123 cm³ and 413 kW, gross weight 30,000 kg
Eschlböck is an Austrian manufacturer of wood chippers for forestry, known above all for its Biber chippers. The model recorded here, the Victor from 2024, has a gross weight of 30,000 kg, making it a heavy machine in class N3 above 12 tonnes.
Read on 3 more paragraphs
For this vehicle the register lists a six-cylinder engine of 16,123 cm³ and 413 kW output. Kerb weight is 26,920 kg, gross weight 30,000 kg. The vehicle is 8,385 mm long and 2,550 mm wide.
A six-cylinder engine of 16.1 litres and 413 kW goes far beyond what a vehicle of this size would need for road use alone, and on a self-propelled chipper of this type it mainly drives the chipping unit. With a difference of only 3,080 kg between kerb weight and gross weight, correspondingly little margin remains for additional load. The width of 2,550 mm sits at the upper end of what is generally allowed for road transport and is usually used to the full when relocating the machine.
For a used self-propelled chipper of this size, check in particular the operating hours and condition of the chipping knives and counter-blade, wear on the feed system, and the condition of the hydraulic system. Also check the frame and running gear for corrosion and wear, and the clutch and gearbox of the large-displacement six-cylinder engine, as well as all hydraulic hoses and fittings around the chipping unit for leaks.
Sources: SpecCodex-Register: Kennwerte des Modells Eschlböck Victor, Eschlböck (manufacturer)
Technical data
Engine
| Power | 413 kWcorrect |
|---|---|
| Cylinders | 6correct |
| Displacement | 16,123 cm³correct |
Dimensions and weights
| Length | 8,385 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Unladen weight | 26,920 kgcorrect |
| Gross vehicle weight | 30,000 kgcorrect |
Where this model stands
Power-to-weight ratio: 15.3 kW/t (413 kW / 26.9 t)
Stronger than 93% of the trucks in the register — out of 25,241 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Eschlböck Victor have?
The Eschlböck Victor delivers 413 kW.
How much does the Eschlböck Victor weigh?
The unladen weight is 26,920 kg.
What is the gross vehicle weight of the Eschlböck Victor?
30,000 kg.
What engine does the Eschlböck Victor have?
6 cylinders, 16,123 cm³ displacement.
What are the dimensions of the Eschlböck Victor?
8,385 mm × 2,550 mm.
When was the Eschlböck Victor built?
Production years: 2024.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.