Start › Augers › Epiroc › ADU › ADU2000

Epiroc ADU2000 – specifications

Series: ADU

Build year not documented · Data origin: Manufacturer information · sources

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Epiroc ADU2000 is an attachment in the Augers category. It is an earth auger used to drill holes for posts, foundations or fencing. The equipment type is Auger drive. It fits carrier machines from 30 to 55 tonnes operating weight. The unladen weight is 1,250 kg. The figures come from the manufacturer's data sheet and describe the base configuration; other equipment variants are possible. The ADU series covers 5 models. Unladen weight within it ranges from 270 to 1,250 kg; the ADU2000 sits at the top of that range with 1,250 kg. Its immediate neighbours are the ADU1500 below it with 850 kg. 91 Epiroc models across 10 series are on record.

Technical data

Dimensions and weights

Unladen weight	1,250 kgcorrect

Other data

Carrier max.	55 tcorrect
Carrier min.	30 tcorrect

Frequently asked questions

How much does the Epiroc ADU2000 weigh?

The unladen weight is 1,250 kg.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 4 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.‌⁠‌⁠⁠‍‌⁠⁠‍⁠⁠‌

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Manufacturer documentation, epiroc.com (retrieved August 2026) · Dealer data sheet, epiroc.com (retrieved August 2026) · Data sources and cross-checks

Mini excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.