Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Ensinger › AS 20

Ensinger AS 20

Built: 1948 · Series: AS

More machines from model year 1948

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The AS 20 from Ensinger is part of the AS series. Production: 1948. The engine delivers 22 hp, has 2 cylinders, with a displacement of 2,356 cm³. Rated speed is 1,500 rpm. The unladen weight is 1,650 kg. Transmission: 7/2 or 4/1. Rated output within this group ranges from 2 to 760 hp; the AS 20 sits at the bottom of that range with 22 hp. Its immediate neighbours are the MODELL - SC below it with 21.9 hp and the 200 above it with 22.3 hp. Rated output within this group ranges from 5 to 585 hp; here the AS 20 sits at the bottom of that range with 22 hp.

Ensinger AS – the small tractors AS 20 and AS 20i: two-cylinder diesel of 2,356 cm³, around 22 hp, unladen weight 1,390 to 1,650 kg

Ensinger was a German maker of small farm tractors whose AS range covered types for smaller and medium-sized holdings. The AS 20 and AS 20i carry the approximate output in metric horsepower in their designation; the i suffix on the AS 20i denotes a revised or differently equipped version of the same base model. Both types share a two-cylinder diesel engine of identical design.

Read on 3 more paragraphs

The register lists here 2 versions with around 22 hp from two-cylinder diesel engines of 2,356 cm³ displacement, with unladen weights from 1,390 to 1,650 kg and rated speeds from 1,500 to 1,600 rpm.

Ensinger was one of the smaller German tractor makers in the highly diversified post-war industry, where numerous regional suppliers served smaller farms alongside major brands such as Deutz, Fendt and Hanomag. The AS range targeted exactly this segment of small and medium-sized farms. Many such marques disappeared from the market already during the 1960s and 1970s, as industry consolidation left room mainly for the largest makers.

When buying these rare small tractors, condition and originality matter most: engine bearings, injection pump and compression of the two-cylinder unit, rust on panels and mudguards, the condition of steering and brakes, and the tightness of the hydraulics. Spares today can practically only be sourced through collectors and tractor clubs.

Sources: SpecCodex register, model data: Ensinger AS

Technical data

Engine

Power22 hpcorrect
Power22 hpcorrect
Rated speed1,500 rpmcorrect
Cylinders2correct
Displacement2,356 cm³correct

Dimensions and weights

Unladen weight1,650 kgcorrect

Drivetrain and chassis

Gearbox7/2 or 4/1correct

Where this model stands

Power-to-weight ratio: 9.8 kW/t (16 kW / 1.6 t)

Power class: Compact (< 40 hp)

Stronger than 9% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Ensinger AS 20 have?

The Ensinger AS 20 delivers 22 hp.

How much does the Ensinger AS 20 weigh?

The unladen weight is 1,650 kg.

What engine does the Ensinger AS 20 have?

2 cylinders, 2,356 cm³ displacement.

When was the Ensinger AS 20 built?

Production years: 1948.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare