Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Ellegaard › MS 2001

Ellegaard MS 2001

Built: 2003 · Series: Other models

More machines from model year 2003

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Ellegaard MS 2001 is a machine built by Ellegaard. Production: 2003. The machine is 10,000 mm long and 2,550 mm wide. The unladen weight is 12,920 kg. The wheelbase measures 1,280 mm. Top speed is 100 km/h. The gross vehicle weight is 13,000 kg. Unladen weight within this group ranges from 85 to 84,800 kg; the MS 2001 sits in the lower part of that range with 12,920 kg. Its immediate neighbours are the M0PE4M below it with 12,910 kg and the STN-3AU above it with 12,930 kg. Gross vehicle weight within this group ranges from 470 to 722,500 kg; here the MS 2001 sits at the bottom of that range with 13,000 kg.

Ellegaard MS 2001 – heavy EU category O4 trailer with a 13,000 kg gross weight, 12,920 kg unladen weight, 10.00 m length and 2.55 m width

At a gross weight of 13,000 kg, the MS 2001 belongs to EU trailer category O4, the band above 10 tonnes for which a compressed-air brake system is mandatory. At 2.55 m width, the MS 2001 sits exactly at the European envelope for road vehicles.

Read on 3 more paragraphs

The unladen weight of 12,920 kg sits only just below the gross weight limit: the structure itself therefore accounts for almost the entire permitted mass, fitting a trailer whose permanently built-in equipment makes up most of the weight and leaves little room for additional external load. At 10.00 m, the MS 2001 is a long vehicle for its weight class. The 1,280 mm figure given in the excerpt falls in the range of the spacing between axles within an axle group, not in the range of a wheelbase running the length of the vehicle.

Towing combinations in this weight class require a category CE licence. The compressed-air brake is load-dependent, and with such a high tare weight the design focuses mainly on the load-bearing capacity of the axles and frame themselves, rather than on additional payload.

When buying used, given the high tare weight the axle suspension and its spring elements deserve particular attention, along with the tightness of the air system along its full length, the frame around the axle mounts for cracking, and the fixed superstructure for corrosion and secure mounting.

Sources: SpecCodex-Register: Kennwerte des Modells Ellegaard MS 2001

Technical data

Dimensions and weights

Length10,000 mmcorrect
Width2,550 mmcorrect
Wheelbase1,280 mmcorrect
Unladen weight12,920 kgcorrect
Gross vehicle weight13,000 kgcorrect

Drivetrain and chassis

Top speed100 km/hcorrect

Frequently asked questions

How much does the Ellegaard MS 2001 weigh?

The unladen weight is 12,920 kg.

What is the gross vehicle weight of the Ellegaard MS 2001?

13,000 kg.

Up to what speed is the Ellegaard MS 2001 approved?

Approved up to 100 km/h.

What are the dimensions of the Ellegaard MS 2001?

10,000 mm × 2,550 mm.

When was the Ellegaard MS 2001 built?

Production years: 2003.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare