Eicher E 25/III
Built: 1950–1955 · Series: E
More machines from model year 1950
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Eicher E – register code for the small tractor with two-cylinder diesel: E 22 and E 25 types across three generation stages, 16 to 18.3 kW, 25 hp, 2,198 cm3 displacement
The E range gathers in the register the small two-cylinder tractors of the Eicher works: the E 22 I type and three generation stages of the E 25 type, marked with the Roman numerals I, II and III. This running numbering shows the step-by-step development of the basic E 25 model across several production years, without the engine's displacement or rated speed changing.
Read on 3 more paragraphs
The register lists here four versions with 16 to 18.3 kW engine output, quoted as 25 hp, from two-cylinder engines of 2,198 cm3 displacement. Unladen weight ranges from 1,680 to 1,880 kg, overall length from 2,600 to 2,800 mm, width from 1,535 to 1,540 mm and height from 1,500 to 1,860 mm. Rated speed sits at 1,500 rpm.
As two-cylinder small tractors in the region of 25 hp, the E range served smaller farms and part-time farmers looking for a simple, robust tractor for field and transport work without the outlay of larger four-cylinder machines, for instance grassland maintenance or driving stationary equipment from the belt pulley.
On these small, now historic two-cylinder tractors, what counts is the condition of the engine for oil consumption and smoking, the clutch and gearbox for wear, the tightness of the hydraulics, and rust on the frame and sheet metal. Parts for the small Eicher engines are available mainly through vintage-tractor specialists and collector fairs.
Sources: SpecCodex register, model data: Eicher E
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 25 hp (18.3 kW)correct |
| Rated speed | 1,500 rpmcorrect |
| Cylinders | 2correct |
| Displacement | 2,198 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 2,800 mmcorrect |
|---|---|
| Width | 1,540 mmcorrect |
| Height | 1,860 mmcorrect |
| Wheelbase | 1,750 mmcorrect |
| Unladen weight | 1,880 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Gearbox | 5/1-ZF-Getriebecorrect |
| Front tyres | 5.50-16correct |
| Rear tyres | 10-28correct |
| Top speed | 20.4 km/hcorrect |
Origin and approval
| Construction | frameless unit constructioncorrect |
|---|---|
| Units built | 1,980correct |
Other data
| PTO speed | 540 rpmcorrect |
|---|
Where this model stands
Power-to-weight ratio: 9.7 kW/t (18 kW / 1.9 t)
Power class: Compact (< 40 hp)
Stronger than 12% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Eicher E 25/III have?
The Eicher E 25/III delivers 25 hp.
How much does the Eicher E 25/III weigh?
The unladen weight is 1,880 kg.
What engine does the Eicher E 25/III have?
2 cylinders, 2,198 cm³ displacement, Diesel.
How fast does the Eicher E 25/III go?
Top speed is 20.4 km/h.
What are the dimensions of the Eicher E 25/III?
2,800 mm × 1,540 mm × 1,860 mm.
When was the Eicher E 25/III built?
Production years: 1950–1955.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.