Eggers SFT 10 ZZL
Built: 2008 · Series: Other models
More machines from model year 2008
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Eggers – other models: the collective page of heavy low-loader trailers outside the named ranges with the HCK, HXT, SF, ST, SX and ZX lines, 1.3 to 32.76 t kerb weight, up to 38 t gross weight
This page gathers the Eggers trailers the register could not assign to its own named range. The type designations consist of a two- or three-letter abbreviation (HCK, HXT, SF, SFT, ST, SX, ZK, ZX), a number for axle count or load capacity, and a suffix such as EL, ZZL, ZL, ES or FL for the axle and steering configuration.
Read on 3 more paragraphs
The register lists 9 versions with kerb weights from 1,300 to 32,760 kg, gross vehicle weights from 2,000 to 38,000 kg, lengths from 6,350 to 13,820 mm and widths from 2,050 to 2,550 mm.
With gross weights up to 38 tonnes and lengths of almost 14 metres, Eggers sits clearly in the field of heavy low-loader semi-trailers for transporting construction machinery and industrial goods, well above the car and light commercial trailers on the other collective pages. As a collective brand without a named range, Eggers sits in the register alongside other manufacturers of heavy-transport equipment.
When buying used at this class, check above all the frame for cracks and torsion, the function of the steering axles, the condition of the hydraulics for ramps or lowering the platform, and the brake system across all axles. Wear on axle bearings and the kingpin, and corrosion on load-bearing sections, are particularly relevant at this payload. Parts and service for heavy trailers are usually handled by specialist commercial-vehicle workshops.
Sources: SpecCodex register, model data: Eggers (weitere Modelle)
Technical data
Dimensions and weights
| Length | 13,700 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 9,750 mmcorrect |
| Unladen weight | 10,720 kgcorrect |
| Gross vehicle weight | 20,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Eggers SFT 10 ZZL weigh?
The unladen weight is 10,720 kg.
What is the gross vehicle weight of the Eggers SFT 10 ZZL?
20,000 kg.
Up to what speed is the Eggers SFT 10 ZZL approved?
Approved up to 100 km/h.
What are the dimensions of the Eggers SFT 10 ZZL?
13,700 mm × 2,550 mm.
When was the Eggers SFT 10 ZZL built?
Production years: 2008.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
