Technical register for agricultural, construction and commercial machinery · sourced data
Scanner Parts Sign in
Start › Electric motors › Ebony › MS0.75/B3/4

Ebony MS0.75/B3/4

Series: Other models

The photo shows the CDF4/B3/4 from the same series. Source: https://www.alamy.com/stock-photo/somalia-kenyan-amisom-kism

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Ebony MS0.75/B3/4 is a three-phase induction motor built by Ebony. The rated output is 0.75 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The rated voltage is 415 V. The housing is frame size MS802. The protection class is IP55. The efficiency is 74.4 per cent at full load, 74.7 per cent at 75 per cent load and 73.2 per cent at half load. The motor weighs 12 kg. At full load it delivers 5.17 Nm. Mounting arrangements to IEC 60034-7: B3, B5, B14, B35 and B34. The motor is built in China. The data is based on the Australian MEPS registration under standard AS/NZS 1359.5:2000 (Legacy); measured to AS 1359.102.1:1997. Rated output across the Ebony range ranges from 0.75 to 22 kW; the MS0.75/B3/4 sits at the bottom of that range with 0.75 kW. Its immediate neighbours are the MS1.1/B3/2 above it with 1.1 kW. 34 Ebony models are on record. The model is listed under Electric motors. 24 verified figures from 1 source are on file.

Technical data

Engine

Rated output0.75 kWcorrect

Dimensions and weights

Weight12 kgcorrect

Electrical data

Rated voltage415 Vcorrect
Number of poles4correct
Protection classIP55correct
Frame sizeMS802correct
Mounting (IEC 60034-7)B3, B5, B14, B35, B34correct
Efficiency at full load74.4 %correct
Efficiency at 75 % load74.7 %correct
Efficiency at half load73.2 %correct

Origin and approval

Country of manufactureChinacorrect

Other data

Standard appliedAS/NZS 1359.5:2000 (Legacy)correct
Test methodAS 1359.102.1:1997correct

Frequently asked questions

How much power does the Ebony MS0.75/B3/4 have?

The Ebony MS0.75/B3/4 delivers 0.8 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

CDF11/B3/2

CDF11/B3/4

CDF15/B3/2

CDF15/B3/4

CDF18.5/B3/2

CDF18.5/B3/4

CDF2.2/B3/6

CDF22/B3/2

CDF22/B3/4

CDF3/B3/6

CDF4/B3/2

CDF4/B3/4

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare