Technical register for agricultural, construction and commercial machinery · sourced data
Scanner Parts Sign in
Start › Electric motors › Ebony › CDF2.2/B3/6

Ebony CDF2.2/B3/6

Series: Other models

The photo shows the CDF4/B3/4 from the same series. Source: https://www.alamy.com/stock-photo/somalia-kenyan-amisom-kism

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The CDF2.2/B3/6 from Ebony is a three-phase induction motor. The rated output is 2.2 kW. The motor is six-pole, which at 50 Hz gives a synchronous speed of 1,000 rpm. The rated voltage is 415 V. The housing is frame size 112 M in foot-mounted form. The protection class is IP55. The efficiency is 79.8 per cent at full load, 80.2 per cent at 75 per cent load and 78.7 per cent at half load. The motor weighs 45 kg. At full load it delivers 22.2 Nm. Mounting arrangements to IEC 60034-7: B14, B34, B5, B35 and B3. The motor is built in China. The values are recorded in the Australian MEPS registration under standard AS/NZS 1359.5:2000 (Legacy); measured to AS 1359.102.1:1997. Rated output across the Ebony range ranges from 0.75 to 22 kW; the CDF2.2/B3/6 sits at the bottom of that range with 2.2 kW. Its immediate neighbours are the MS1.5/B3/4 below it with 1.5 kW and the CDF3/B3/6 above it with 3 kW. 34 Ebony models are on record. The model is listed under Electric motors. 24 verified figures from 1 source are on file.

Ebony – other models: the collective page of MEPS-registered CDF and MS three-phase motors outside the named ranges, frame sizes 90 to 180, 0.75 to 22 kW, 2- to 6-pole, from China

This page brings together the three-phase motors from Ebony that the Australian energy-efficiency register (GEMS/MEPS) does not assign to a named series. Type designations follow two ranges: CDF, for example CDF11/B3/2 or CDF18.5/B3/4, and MS, for example MS0.75/B3/2. In both cases the digit after the series code directly names the rated output in kW, followed by the mounting code and the pole count.

Read on 3 more paragraphs

The register lists here 34 versions with 0.75 to 22 kW, two- to six-pole, at a supply voltage of 415 V. Efficiency at full load ranges from 74.4 to 91.61%, and at 75% load from 74.7 to 91.84%. Frame sizes run from 90 to 180, all 34 motors carry the IP55 rating and are manufactured in China. Mounting covers combinations of B3, B5, B14, B34 and B35; testing followed AS/NZS 1359.5:2000 (Legacy) using test method B, and none of the motors reaches a High Efficiency classification under GEMS.

The page thus shows Ebony's two-part base programme made up of the output-named CDF range and the MS range, with which the manufacturer competes in the power band up to 22 kW against other Chinese standard-motor suppliers in the MEPS register; stating the output directly in the type name makes matching parts easier.

When buying used, check the condition of the rolling bearings, a measured winding insulation resistance, visible overheating marks on the terminal box and fan cover, and a legible nameplate showing frame size, pole count and mounting code. Since none of the motors carries a High Efficiency classification, it is worth checking actual energy use under continuous duty before buying; bearings and terminal boxes for the IEC frame sizes are usually available independent of the manufacturer.

Sources: Kennwerte der Modelle Ebony (weitere Modelle, MEPS-Registrierungen)

Technical data

Engine

Rated output2.2 kWcorrect

Dimensions and weights

Weight45 kgcorrect

Electrical data

Rated voltage415 Vcorrect
Number of poles6correct
Protection classIP55correct
Frame size112 M (foot)correct
Mounting (IEC 60034-7)B14, B34, B5, B35, B3correct
Efficiency at full load79.8 %correct
Efficiency at 75 % load80.2 %correct
Efficiency at half load78.7 %correct

Origin and approval

Country of manufactureChinacorrect

Other data

Standard appliedAS/NZS 1359.5:2000 (Legacy)correct
Test methodAS 1359.102.1:1997correct

Frequently asked questions

How much power does the Ebony CDF2.2/B3/6 have?

The Ebony CDF2.2/B3/6 delivers 2.2 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

CDF11/B3/2

CDF11/B3/4

CDF15/B3/2

CDF15/B3/4

CDF18.5/B3/2

CDF18.5/B3/4

CDF22/B3/2

CDF22/B3/4

CDF3/B3/6

CDF4/B3/2

CDF4/B3/4

CDF4/B3/6

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare