Dynapac PL600S
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Dynapac PL600S is a Cold planers made by Dynapac. Engine output is 129 kW.
It will not go faster than 6 km/h — a working pace, not a travelling one.
Within the range, rated power spans from 45 to 447 kW; with 129 kW, the PL600S sits in the mid-field. Directly alongside are the PL350S with 45 kW below and the PL2100S with 447 kW above.
Technical data
Engine
| Engine make | 2,347correct |
|---|---|
| Engine model | QSB 5.9-30-TAAcorrect |
| Power | 129 kWcorrect |
Drivetrain and chassis
| Top speed | 6.1 km/hcorrect |
|---|
Working data
| Hydraulic oil capacity | 130.2 lcorrect |
|---|---|
| Fuel tank capacity | 340.3 lcorrect |
Frequently asked questions
How much power does the Dynapac PL600S have?
The Dynapac PL600S delivers 129 kW.
How fast does the Dynapac PL600S go?
Top speed is 6.1 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Asphalt paver in 3D section
Turn the model, look inside and click an assembly — each one is explained.