Dynapac PL2100S – specifications
Series: Other models
Build year not documented · Data origin: Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Dynapac PL2100S is a Cold planers made by Dynapac. The engine produces 447 kW.
Top speed is 5 km/h.
Within the range, rated power spans from 45 to 447 kW; with 447 kW, the PL2100S sits at the top. Below it ranks the PL600S with 129 kW.
Dynapac PL600S: cold planer from the Swedish manufacturer with a Cummins QSB 5.9-30-TAA engine, 129 kW of power, a 340.3 l fuel tank and a 6.1 km/h working speed while milling
Dynapac is an originally Swedish manufacturer of road construction machinery, now part of the French Fayat group, known for rollers, pavers and cold planers used in road building. The PL600S is a cold planer from that range, built for removing and rehabilitating asphalt surfaces.
Read on 3 more paragraphs
The PL600S is powered by a Cummins engine, type QSB 5.9-30-TAA, producing 129 kW. The hydraulic system holds 130.2 l of oil, and the fuel tank 340.3 l. Top speed while working is 6.1 km/h.
On cold planers, milling width, cutting depth and engine power together determine the size class: smaller planers work on trench and duct jobs, larger ones on resurfacing entire stretches of road. The 129 kW engine output quoted for the PL600S and its large 340.3 l fuel tank point to a planer built for continuous operation over longer milling runs without needing to refuel often.
When buying a used cold planer such as the PL600S, the condition of the milling drum and its tool holders matters, since worn or missing cutting picks reduce milling output and load the drum unevenly. The conveyor for the milled material should be checked for cracks and correct running, the height-adjustment hydraulic hoses for leaks, and the Cummins engine for oil loss at the seals. The rubber side skirts around the drum housing are also worth a look, since worn skirts let milled material scatter uncontrolled to the sides during work.
Sources: SpecCodex-Register: Kennwerte des Modells Dynapac PL600S, Dynapac (manufacturer)
Technical data
Engine
| Engine model | QSX 15correct |
|---|---|
| Power | 447 kWcorrect |
Drivetrain and chassis
| Top speed | 5.1 km/hcorrect |
|---|
Working data
| Fuel tank capacity | 1,100 lcorrect |
|---|
More machines with this engine (Cummins QSX-15, 7)
Frequently asked questions
How much power does the Dynapac PL2100S have?
The Dynapac PL2100S delivers 447 kW.
How fast does the Dynapac PL2100S go?
Top speed is 5.1 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 4 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · Data sources and cross-checks
Asphalt paver in 3D section
Turn the model, look inside and click an assembly — each one is explained.
