Dynapac CA150
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Dynapac CA150 is a Compaction equipment from Dynapac. 60 kW is available.
At 12 km/h, that is as fast as it goes. Empty, it weighs 7,000 kg.
Within the range, rated power spans from 53 to 535 kW; with 60 kW, the CA150 sits in the lower third. Directly alongside are the CA121D with 53 kW below and the CC422C with 93.1 kW above.
Technical data
Engine
| Engine model | 4 3.3correct |
|---|---|
| Power | 60 kWcorrect |
Dimensions and weights
| Length | 4,780 mmcorrect |
|---|---|
| Width | 1,850 mmcorrect |
| Unladen weight | 7,000 kgcorrect |
Drivetrain and chassis
| Top speed | 12.1 km/hcorrect |
|---|
Where this model stands
Power-to-weight ratio: 8.6 kW/t (60 kW / 7 t)
Stronger than 19% of the compaction equipment in the register — out of 219 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Dynapac CA150 have?
The Dynapac CA150 delivers 60 kW.
How much does the Dynapac CA150 weigh?
The unladen weight is 7,000 kg.
How fast does the Dynapac CA150 go?
Top speed is 12.1 km/h.
What are the dimensions of the Dynapac CA150?
4,780 mm × 1,850 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Road roller in 3D section
Turn the model, look inside and click an assembly — each one is explained.