Dynapac CA141D
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Dynapac CA141D is a Compaction equipment from Dynapac. The engine is rated at 535 kW.
It will not go faster than 7 km/h — a working pace, not a travelling one. Unladen, it tips the scales at 4,900 kg.
Within the range, rated power spans from 53 to 535 kW; with 535 kW, the CA141D sits at the top. Below it ranks the CC622HF with 93.1 kW.
Technical data
Engine
| Engine make | 2,240correct |
|---|---|
| Engine model | e 3029 TFcorrect |
| Power | 535 kWcorrect |
Dimensions and weights
| Unladen weight | 4,900 kgcorrect |
|---|
Drivetrain and chassis
| Top speed | 7.1 km/hcorrect |
|---|
Where this model stands
Power-to-weight ratio: 109.2 kW/t (535 kW / 4.9 t)
Stronger than 100% of the compaction equipment in the register — out of 223 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Dynapac CA141D have?
The Dynapac CA141D delivers 535 kW.
How much does the Dynapac CA141D weigh?
The unladen weight is 4,900 kg.
How fast does the Dynapac CA141D go?
Top speed is 7.1 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Road roller in 3D section
Turn the model, look inside and click an assembly — each one is explained.