Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Draco › Other models › D.H.78-39-420

Draco D.H.78-39-420

Built: 1972 · Series: Other models

More machines from model year 1972

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Draco D.H.78-39-420 is a vehicle built by Draco. Production: 1972. The engine has 4 cylinders. The vehicle is 2,200 mm wide. The unladen weight is 2,740 kg. The wheelbase measures 3,900 mm. The gross vehicle weight is 4,280 kg. The vehicle runs on 4 wheels. Unladen weight across the Draco range ranges from 336 to 28,900 kg; the D.H.78-39-420 sits at the bottom of that range with 2,740 kg. Its immediate neighbours are the MDS218 below it with 2,720 kg and the DAL 1140 above it with 2,770 kg. Gross vehicle weight across the Draco range ranges from 1,200 to 56,000 kg; here the D.H.78-39-420 sits at the bottom of that range with 4,280 kg. 394 Draco models across 23 series are on record.

Draco D.H.78-39-420 – a commercial vehicle with a four-cylinder engine, gross vehicle weight 4,280 kg, wheelbase 3,900 mm, four wheels

Draco D.H.78-39-420 is a commercial vehicle from 1972 with a gross vehicle weight of 4,280 kg, placing it just above the 3.5-tonne threshold in the N2 class. The wheelbase of 3,900 mm on four wheels matches the proportions of a two-axle vehicle of medium size.

Read on 3 more paragraphs

For this vehicle the register lists a four-cylinder engine. Kerb weight is 2,740 kg, gross vehicle weight 4,280 kg. The vehicle has four wheels, a wheelbase of 3,900 mm and a width of 2,200 mm.

The difference between kerb weight and gross vehicle weight is 1,540 kg, a clear payload margin typical of a vehicle with interchangeable bodies or varying loads. Because the gross vehicle weight is only just above the 3.5-tonne mark, a category C1 licence is already sufficient for this particular vehicle within class N2. The width of 2,200 mm matches the dimension typical of commercial vehicles from this period, without any oversized special body.

For a used example of this age, check in particular the frame and running gear for corrosion and wear, the clutch and gearbox of the four-cylinder engine, and the operation of the brakes. Given its age, it is also worth checking the frame for earlier repairs, the availability of spare parts for the drivetrain, and the condition of the brake and fuel lines, which often show corrosion on vehicles this old.

Sources: SpecCodex-Register: Kennwerte des Modells Draco D.H.78-39-420

Technical data

Engine

Cylinders4correct

Dimensions and weights

Width2,200 mmcorrect
Wheelbase3,900 mmcorrect
Unladen weight2,740 kgcorrect
Gross vehicle weight4,280 kgcorrect

Drivetrain and chassis

Wheels4correct

Frequently asked questions

How much does the Draco D.H.78-39-420 weigh?

The unladen weight is 2,740 kg.

What is the gross vehicle weight of the Draco D.H.78-39-420?

4,280 kg.

What engine does the Draco D.H.78-39-420 have?

4 cylinders.

When was the Draco D.H.78-39-420 built?

Production years: 1972.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare