Dongfeng RAM 2500 4X4
Built: 2008 · Series: Other models
More machines from model year 2008
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Ram 2500 4x4 – a heavy pickup truck with a six-cylinder engine of 6,690 cm³, gross vehicle weight 3,500 kg, permanent four-wheel drive
The Ram 2500 4x4 recorded here, from 2008, is a heavy four-wheel-drive pickup with a gross vehicle weight of 3,500 kg, placing it in the light N1 class. The wheelbase of 3,570 mm against a width of 1,980 mm matches the proportions of a classic American pickup built on a full-length ladder frame.
Read on 3 more paragraphs
For this vehicle the register lists a six-cylinder engine of 6,690 cm³. Kerb weight is 2,898 kg, gross vehicle weight 3,500 kg. The vehicle has four wheels, a wheelbase of 3,570 mm and a width of 1,980 mm.
A displacement of 6,690 cm³ in a vehicle of this class points to a large engine designed for towing or heavy loads rather than economical everyday use. The four-wheel drive additionally prepares the vehicle for unpaved or winter surfaces, as found on construction sites and farms. Despite a gross vehicle weight of only 3,500 kg and the resulting N1 classification, the 602 kg difference to kerb weight leaves a decent payload margin for a pickup.
For a used four-wheel-drive pickup of this type, check the condition of the transfer case and drive shafts, the frame and running gear for corrosion, especially after winter road-salt exposure, and the clutch and gearbox of the large-displacement engine. The brake system should also be checked for proper operation under a full load, along with the transfer case and axle seals for oil leaks.
Sources: SpecCodex-Register: Kennwerte des Modells Ram 2500 4x4
Technical data
Engine
| Cylinders | 6correct |
|---|---|
| Displacement | 6,690 cm³correct |
Dimensions and weights
| Width | 1,980 mmcorrect |
|---|---|
| Wheelbase | 3,570 mmcorrect |
| Unladen weight | 2,898 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Dongfeng RAM 2500 4X4 weigh?
The unladen weight is 2,898 kg.
What is the gross vehicle weight of the Dongfeng RAM 2500 4X4?
3,500 kg.
What engine does the Dongfeng RAM 2500 4X4 have?
6 cylinders, 6,690 cm³ displacement.
When was the Dongfeng RAM 2500 4X4 built?
Production years: 2008.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
