Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Dieci › Agri › AGRI FARMER 26.6

Dieci AGRI FARMER 26.6 (74.5 kW)

Built: 2013 · Series: Agri

More machines from model year 2013

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The AGRI FARMER 26.6 from Dieci is part of the Agri series. Production: 2013. The engine delivers 74.5 kW, has 4 cylinders, with a displacement of 4,400 cm³. The machine is 4,802 mm long and 2,260 mm wide. The unladen weight is 6,560 kg. The gross vehicle weight is 7,000 kg. The Agri series covers 25 models. Rated output within it ranges from 73.4 to 129 kW; the AGRI FARMER 26.6 sits at the bottom of that range with 74.5 kW. Its immediate neighbours are the AGRI FARMER 32.6 below it with 73.4 kW and the AGRI FARMER 30.7 above it with 79.5 kW. Unladen weight within it ranges from 6,500 to 11,700 kg; here the AGRI FARMER 26.6 sits at the bottom of that range with 6,560 kg. 100 Dieci models across 9 series are on record.

Dieci Agri – telehandlers with tractor approval from Montecchio Emilia: Agri Farmer, Plus, Star, Tech, Max and Pivot, 2.6 to 6.5 t lift, 6 to 10 m

Dieci of Montecchio Emilia in the province of Reggio Emilia has built telehandlers since 1983 and is one of the big Italian suppliers alongside Merlo and Faresin; the Agri range is the agricultural programme, which in many countries runs with tractor approval and therefore sits among the tractors in the register. The type designation is a formula: the first number gives the lift capacity in hundreds of kilograms, the second the lift height in metres – an Agri Farmer 30.7 lifts 3,000 kg to 7 m, an Agri Max 65.8 lifts 6,500 kg to 8 m, an Agri Star 38.10 reaches 10 m. The name suffixes grade the sizes: Farmer for the compact class, Plus and Star for the mid-range, Tech for the version with more hydraulic capacity, Max for the heavy class. Agri Pivot T70 to T90 are articulated machines with a telescopic arm – a wheel-loader concept with a telescope instead of a rigid lift frame.

Read on 3 more paragraphs

Further codes: VS stands for the stepless hydrostatic version (Vario System), EVO2 for the generation from about 2015, GD for the version with powershift transmission, TC and TA for equipment levels. In the register the models run from 73.4 to 129 kW from four-cylinders of 3,621 to 4,485 cm³, unladen weights from 6,500 to 11,700 kg, gross weights from 7,000 to 14,000 kg, lengths from 4,580 to 7,040 mm and widths from 2,040 to 2,550 mm.

Tractor approval allows trailer operation and a PTO and makes the telehandler a yard-tractor substitute: stacking bales, mixing feed, loading manure and towing trailers with one vehicle.

On used machines, operating hours, wear of the boom wear pads, play in the boom and rear-axle steering, the condition of the hydraulic cylinders and the tyres count; on models with aftertreatment, the service state of the particulate filter.

Sources: SpecCodex register, model data: Dieci Agri, Dieci (manufacturer)

Technical data

Engine

Power74.5 kWcorrect
Cylinders4correct
Displacement4,400 cm³correct

Dimensions and weights

Length4,802 mmcorrect
Width2,260 mmcorrect
Unladen weight6,560 kgcorrect
Gross vehicle weight7,000 kgcorrect

Where this model stands

Power-to-weight ratio: 11.4 kW/t (74 kW / 6.6 t)

Power class: Large (100–180 hp)

Stronger than 67% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Dieci AGRI FARMER 26.6 have?

The Dieci AGRI FARMER 26.6 delivers 74.5 kW.

How much does the Dieci AGRI FARMER 26.6 weigh?

The unladen weight is 6,560 kg.

What is the gross vehicle weight of the Dieci AGRI FARMER 26.6?

7,000 kg.

What engine does the Dieci AGRI FARMER 26.6 have?

4 cylinders, 4,400 cm³ displacement.

What are the dimensions of the Dieci AGRI FARMER 26.6?

4,802 mm × 2,260 mm.

When was the Dieci AGRI FARMER 26.6 built?

Production years: 2013.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare