Diamond Z DZH 7000
Built: 2006 · Series: Other models
More machines from model year 2006
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Diamond Z – other models: the collective page of trailer-mounted machines outside the named ranges, DZH-series horizontal grinders, operating weights from 34,400 to 48,480 kg, gross weights from 37,000 to 50,000 kg
This page gathers the Diamond Z trailer-mounted machines the register could not assign to a named range. Diamond Z, based in Caldwell, Idaho, builds DZH-series horizontal grinders – the DZH 4000 and DZH 7000 – that shred wood, green waste and bulky refuse on their own road-going chassis, making them trailers in the sense of registration.
Read on 3 more paragraphs
The register lists here 4 versions with operating weights from 34,400 to 48,480 kg, gross weights from 37,000 to 50,000 kg, a length of 12,950 mm and a width of 2,990 mm.
With operating weights above 34 tonnes, the DZH grinders count among the heaviest road-going units in the mobile processing segment; they work at composting operations, sawmills and green-waste recycling sites, processing material on site at changing locations. Comparable machines are rarer in Europe, so DZH grinders mostly reach the market through import from North America.
On used machines, the condition of the grinding drum and hammers, the operating hours and the condition of the drive engine, the function of the screens and conveyor belts and rust and wear on the chassis all count; given the high operating weight, the axles, brake system and tyres of the road chassis should also be checked. Wear parts such as hammers and screens are supplied by Diamond Z and specialist grinding-equipment dealers.
Sources: SpecCodex register, model data: Diamond Z (weitere Modelle)
Technical data
Dimensions and weights
| Wheelbase | 1,174 mmcorrect |
|---|---|
| Unladen weight | 48,480 kgcorrect |
| Gross vehicle weight | 50,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Diamond Z DZH 7000 weigh?
The unladen weight is 48,480 kg.
What is the gross vehicle weight of the Diamond Z DZH 7000?
50,000 kg.
Up to what speed is the Diamond Z DZH 7000 approved?
Approved up to 100 km/h.
When was the Diamond Z DZH 7000 built?
Production years: 2006.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
