Dfm EQ465I2-30 CARGO VAN
Built: 2008 · Series: Other models
More machines from model year 2008
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
DFM – other models: the collective page of the Dongfeng EQ465I2-30 as a cargo van and pick-up, four-cylinder engine of 1.0 litre, gross weight 1,855 kg
This page gathers models from the DFM brand (Dongfeng Motor Corporation, Wuhan) under the type designation EQ465I2-30, listed once as a cargo van and once as a mini truck pick-up. The EQ designation follows Dongfeng's traditional type nomenclature for commercial vehicles, used across the group's models for decades and still recognisable on current production.
Read on 3 more paragraphs
The register lists 2 versions here with a uniform displacement of 1,012 cm³ from four-cylinder engines, kerb weights from 873 to 1,063 kg, a uniform gross vehicle weight of 1,855 kg and a width of 1,560 mm.
As a micro van with around 1.0 litre of displacement and a gross weight under 2,000 kg, the EQ465I2-30 targets use as a manoeuvrable delivery vehicle in city centres and as a light pick-up for small loads, a segment where Chinese makers such as DFM are increasingly present in Asian, African and Eastern European markets; the identical gross weight of both body versions points to a shared technical base.
For a used example, check corrosion on the frame and load bed, the condition of the clutch and brake system, the tightness of the cab, and on the van version the condition of the load-space doors and their seals; on the pick-up, also check the bed liner and tow hitch, where fitted. Parts run through the DFM or Dongfeng distribution network.
Sources: SpecCodex register, model data: DFM (weitere Modelle)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 1,012 cm³correct |
Dimensions and weights
| Width | 1,560 mmcorrect |
|---|---|
| Wheelbase | 2,540 mmcorrect |
| Unladen weight | 1,063 kgcorrect |
| Gross vehicle weight | 1,855 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Dfm EQ465I2-30 CARGO VAN weigh?
The unladen weight is 1,063 kg.
What is the gross vehicle weight of the Dfm EQ465I2-30 CARGO VAN?
1,855 kg.
What engine does the Dfm EQ465I2-30 CARGO VAN have?
4 cylinders, 1,012 cm³ displacement.
When was the Dfm EQ465I2-30 CARGO VAN built?
Production years: 2008.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
