Deutz-Fahr AgroXtra 4.07
Built: 1991–1995 · Series: AgroXtra - Klasse
More machines from model year 1991
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
AgroXtra 4.07: Deutz-Fahr tractor built 1991 to 1995 with an air-cooled 3.8-litre four-cylinder engine, 48 kW and a weight of 3,375 kg
The AgroXtra class belongs to the more compact Deutz-Fahr ranges of the early 1990s and was built from 1991 to 1995. The AgroXtra 4.07 still carries an air-cooled four-cylinder engine, as was typical of Deutz engines of that period and considered low-maintenance and frost-resistant thanks to having no coolant.
Read on 3 more paragraphs
The air-cooled four-cylinder diesel engine with 3,768 cm³ of displacement produces 65 hp, or 48 kW, at 2,350 rpm, with 230 Nm of torque. At 3,375 kg, 3,800 mm long, 2,460 mm high and 1,870 mm wide, the tractor reaches a top speed of 40 km/h with a 2,250 mm wheelbase.
An air-cooled four-cylinder engine with 48 kW covers the typical work of a medium field tractor, from tillage with a plough and cultivator to transport runs with a trailer; the 40 km/h approval allowed brisk road travel between yard and field. Doing without a liquid-cooling circuit simplifies the engineering compared with water-cooled engines of the same power class.
When buying a used air-cooled Deutz engine, the condition of the fan and the cooling fins on the cylinders matters most, since dirt build-up leads to overheating faster here than on water-cooled engines. Also worth checking are the clutch, gearbox and the tightness of the injection pump, along with corrosion on sheet-metal parts on a machine of this age.
Sources: SpecCodex-Register: Kennwerte des Modells AgroXtra 4.07, Deutz-Fahr (manufacturer)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 65 hp (48 kW)correct |
| Rated speed | 2,350 rpmcorrect |
| Torque | 230 Nmcorrect |
| Cylinders | 4correct |
| Displacement | 3,768 cm³correct |
| Cooling | air-cooledcorrect |
Dimensions and weights
| Length | 3,800 mmcorrect |
|---|---|
| Width | 1,870 mmcorrect |
| Height | 2,460 mmcorrect |
| Wheelbase | 2,250 mmcorrect |
| Unladen weight | 3,375 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 16V / 8Rcorrect |
| Front tyres | 375 / 75 R 20correct |
| Rear tyres | 16.9 R 30correct |
| Top speed | 40 km/hcorrect |
Working data
| Fuel tank capacity | 83 lcorrect |
|---|
Where this model stands
Power-to-weight ratio: 14.2 kW/t (48 kW / 3.4 t)
Power class: Universal (40–100 hp)
Stronger than 45% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Deutz-Fahr AgroXtra 4.07 have?
The Deutz-Fahr AgroXtra 4.07 delivers 65 hp.
How much does the Deutz-Fahr AgroXtra 4.07 weigh?
The unladen weight is 3,375 kg.
What engine does the Deutz-Fahr AgroXtra 4.07 have?
4 cylinders, 3,768 cm³ displacement, Diesel.
How fast does the Deutz-Fahr AgroXtra 4.07 go?
Top speed is 40 km/h.
What are the dimensions of the Deutz-Fahr AgroXtra 4.07?
3,800 mm × 1,870 mm × 2,460 mm.
When was the Deutz-Fahr AgroXtra 4.07 built?
Production years: 1991–1995.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 19 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.