Deutz-Fahr Agrotron 105 MK3
Built: 2001–2003 · Series: Agrotron (MK3)
More machines from model year 2001
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Agrotron 105 MK3: Deutz-Fahr tractor built 2001 to 2003 with a 4.8-litre six-cylinder engine, 73.6 kW, 432 Nm of torque and a weight of 4,500 kg
The Agrotron 105 MK3 belongs to the third Agrotron generation from Deutz-Fahr and was built between 2001 and 2003. Compared with the earlier MK2 generation, the range gained a six-cylinder engine in this power class among other changes.
Read on 3 more paragraphs
The six-cylinder diesel engine with 4,788 cm³ of displacement produces 100 hp, or 73.6 kW, at 2,300 rpm, with 432 Nm of torque. At 4,500 kg, 4,470 mm long, 2,795 mm high, 2,060 mm wide and with a 2,647 mm wheelbase, the tractor reaches a top speed of 40 km/h.
A six-cylinder engine with a moderate 73.6 kW runs more smoothly and with better refinement than a comparably powerful four-cylinder, giving the Agrotron 105 MK3 an edge in continuous front-loader work or on long transport runs at 40 km/h. The machine covers tillage on medium-sized fields and operation of common towed implements. The 432 Nm of torque is already available at medium engine speeds, which lowers fuel use and noise in everyday work with the power take-off.
When buying a used tractor with this six-cylinder engine, the condition of the injection system matters most, particularly at high hours, along with oil consumption and running noise. Also worth checking are the clutch, gearbox and the tightness of the hydraulic circuits for the front loader and implements, as well as corrosion on the frame and cab.
Sources: SpecCodex-Register: Kennwerte des Modells Agrotron 105 MK3, Deutz-Fahr (manufacturer)
Technical data
Engine
| Fuel | Diesel / Biodieselcorrect |
|---|---|
| Power | 100 hp (73.6 kW)correct |
| Rated speed | 2,300 rpmcorrect |
| Torque | 432 Nmcorrect |
| Cylinders | 6correct |
| Displacement | 4,788 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,470 mmcorrect |
|---|---|
| Width | 2,060 mmcorrect |
| Height | 2,795 mmcorrect |
| Wheelbase | 2,647 mmcorrect |
| Ground clearance | 485 mmcorrect |
| Unladen weight | 4,500 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 24V/8Rcorrect |
| Front tyres | 16.9 R 24 AScorrect |
| Rear tyres | 16.9 R 38 AScorrect |
| Top speed | 40 km/hcorrect |
Working data
| Fuel tank capacity | 180 lcorrect |
|---|
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Other data
| Linkage category | Cat IIcorrect |
|---|
Where this model stands
Power-to-weight ratio: 16.4 kW/t (74 kW / 4.5 t)
Power class: Universal (40–100 hp)
Stronger than 66% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Deutz-Fahr Agrotron 105 MK3 have?
The Deutz-Fahr Agrotron 105 MK3 delivers 100 hp.
How much does the Deutz-Fahr Agrotron 105 MK3 weigh?
The unladen weight is 4,500 kg.
What engine does the Deutz-Fahr Agrotron 105 MK3 have?
6 cylinders, 4,788 cm³ displacement, Diesel / Biodiesel.
How fast does the Deutz-Fahr Agrotron 105 MK3 go?
Top speed is 40 km/h.
What are the dimensions of the Deutz-Fahr Agrotron 105 MK3?
4,470 mm × 2,060 mm × 2,795 mm.
When was the Deutz-Fahr Agrotron 105 MK3 built?
Production years: 2001–2003.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
