Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Deutz-Fahr › 5 D Keyline › 5090 D Keyline

Deutz-Fahr 5090 D Keyline

Built: 2019 · Series: 5 D Keyline

More machines from model year 2019

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Deutz-Fahr 5090 D Keyline is a model in the 5 D Keyline series. Production: 2019. The engine delivers 84 hp (62 kW), has 3 cylinders, with a displacement of 2,887 cm³. Rated speed is 2,200 rpm. The machine is 3,860 mm long, 1,882 mm wide and 2,495 mm high. The unladen weight is 3,200 kg. The wheelbase measures 2,100 mm. Top speed is 40 km/h. Lifting capacity is 2,500 kg. Transmission: 15/15, 30/15. The engine is water-cooled. Tyres: front 360/70R20, rear 420/70R30. The fuel is diesel. Rated output across the Deutz-Fahr range ranges from 29 to 305 hp; the 5090 D Keyline sits in the lower part of that range with 84 hp. Its immediate neighbours are the DX 86 below it with 82 hp and the 5090.4D above it with 88 hp. Rated output across the Deutz-Fahr range ranges from 29 to 305 hp; here the 5090 D Keyline sits in the lower part of that range with 84 hp. 692 Deutz-Fahr models across 50 series are on record.

Deutz-Fahr 5090 D Keyline: water-cooled three-cylinder utility tractor of the Series 5 with 2,887 cm³ displacement, 84 hp (62 kW) and 2,500 kg lift capacity

Deutz-Fahr also offers the 5 D range in the Keyline specification, which adds further comfort and control features over the base version. Like the 5080 D, the 5090 D Keyline targets smaller and medium-sized holdings, but with somewhat more power and equipment.

Read on 3 more paragraphs

The three-cylinder diesel engine with 2,887 cm³ displacement is water-cooled and produces 84 hp, or 62 kW, at 2,200 rpm. At 3,200 kg weight, 3,860 mm length, 1,882 mm width and 2,495 mm height, the three-point hydraulics lift up to 2,500 kg.

With a top speed of 40 km/h, the 5090 D Keyline reaches the upper limit of driving licence category L. The 2,500 kg lift capacity suffices for medium-weight implements in tillage and grassland maintenance, while the water-cooled three-cylinder engine ensures an even operating temperature even under sustained load.

When buying a 5090 D Keyline, check the condition of the radiator and coolant hoses, as well as the tightness of the hydraulic system at the lift arms. Also check the clutch, gearbox and the function of the additional Keyline control features, which can show mechanical wear on used machines. It is also worth checking the wiring behind the dashboard and the cab seals, since the additional equipment of the Keyline version brings more electrical connections that can age on used machines.

Sources: SpecCodex-Register: Kennwerte des Modells Deutz-Fahr 5090 D Keyline, Deutz-Fahr (manufacturer)

Technical data

Engine

Fueldieselcorrect
Power84 hp (62 kW)correct
Rated speed2,200 rpmcorrect
Cylinders3correct
Displacement2,887 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,860 mmcorrect
Width1,882 mmcorrect
Height2,495 mmcorrect
Wheelbase2,100 mmcorrect
Unladen weight3,200 kgcorrect

Drivetrain and chassis

Gearbox15/15, 30/15correct
Front tyres360/70R20correct
Rear tyres420/70R30correct
Top speed40 km/hcorrect

Working data

Lifting capacity2,500 kgcorrect

Where this model stands

Power-to-weight ratio: 19.4 kW/t (62 kW / 3.2 t)

Power class: Universal (40–100 hp)

Stronger than 58% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Deutz-Fahr 5090 D Keyline have?

The Deutz-Fahr 5090 D Keyline delivers 84 hp.

How much does the Deutz-Fahr 5090 D Keyline weigh?

The unladen weight is 3,200 kg.

What engine does the Deutz-Fahr 5090 D Keyline have?

3 cylinders, 2,887 cm³ displacement, Diesel.

How fast does the Deutz-Fahr 5090 D Keyline go?

Top speed is 40 km/h.

How much does the rear linkage of the Deutz-Fahr 5090 D Keyline lift?

The rear linkage lifts 2,500 kg.

What are the dimensions of the Deutz-Fahr 5090 D Keyline?

3,860 mm × 1,882 mm × 2,495 mm.

When was the Deutz-Fahr 5090 D Keyline built?

Production years: 2019.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 4 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · UK government data (DVLA) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare