StartTractorsDetank › RV1654

Detank RV1654

Built: 2014-2015 · Series: Other models

The photo shows the RD354 from the same series. Source: https://www.tractorbynet.com/forums/threads/older-internatio

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Detank RV1654 rolled off the line in 2014-2015 as a tractor. The engine is rated at 123 kW.

Propulsion comes from MFWD.

It runs on diesel; the engine is water-cooled. It replaced the Chery RV1654 and was in turn replaced by the Zoomlion RV1654. Within the range, rated power spans from 19 to 138 kW; with 123 kW, the RV1654 sits at the top. Directly alongside are the RV1554 with 116 kW below and the AA1854 with 138 kW above.

Technical data

Engine

Engine makeYuchaicorrect
Fueldieselcorrect
Power165 hp (123 kW)correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Driveselectable four-wheel drivecorrect

Origin and approval

PlantWuhu, Anhui, Chinacorrect
PredecessorChery RV1654correct
SuccessorZoomlion RV1654correct

Frequently asked questions

How much power does the Detank RV1654 have?

The Detank RV1654 delivers 165 hp.

When was the Detank RV1654 built?

Production years: 2014-2015.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare