Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Deering International › TITAN-Baureihe › TITAN 10-20

Deering International TITAN 10-20

Built: 1915–1920 · Series: TITAN-Baureihe

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The TITAN 10-20 from Deering International is part of the TITAN series. Production: 1915–1920. The engine delivers 20.3 hp (14.9 kW), has 2 cylinders, with a displacement of 8,700 cm³. Rated speed is 575 rpm. The machine is 3,734 mm long, 1,524 mm wide and 1,695 mm high. The unladen weight is 2,589 kg. The wheelbase measures 2,311 mm. Top speed is 6.6 km/h. Transmission: 2 V/1 R. The engine is water-cooled. Tyres: front 36"x 6", rear 54"x 10". The fuel is Kerosin. The bore measures 165.1 mm. The stroke is 203.2 mm. Around 78.363 units were built. The TITAN-Baureihe series covers 4 models. Rated output within it ranges from 20.3 to 60.8 hp; the TITAN 10-20 sits at the bottom of that range with 20.3 hp. Its immediate neighbours are the TITAN 12-25 above it with 25.3 hp. Unladen weight within it ranges from 2,589 to 9,344 kg; here the TITAN 10-20 sits at the bottom of that range with 2,589 kg. 4 Deering International models are on record.

Deering International Titan-Baureihe – large tractors from the 1910s: types Titan 10-20 to Titan 30-60, two- to four-cylinder engines up to 44.7 kW, unladen weights of 2,589 to 9,344 kg

International Harvester was formed in 1902 from the merger of several American farm-machinery makers, including the McCormick Harvesting Machine Company and the Deering Harvester Company; Titan was one of the new group's early tractor brands, under which large tractors such as the Titan 10-20 were built in the 1910s, before the brand was superseded by the subsequent McCormick-Deering tractors. The type numbers such as 10-20, 12-25, 18-35 and 30-60 state the power output at the drawbar and belt pulley in horsepower.

Read on 3 more paragraphs

The register lists 4 versions with 14.9 to 44.7 kW from two- to four-cylinder engines of 8,700 to 11,352 cm³ displacement, unladen weights from 2,589 to 9,344 kg and very low rated speeds of 335 to 575 rpm, typical of this early generation of tractors; lengths range from 3,569 to 4,877 mm, widths from 1,524 to 2,667 mm, heights from 1,695 to 3,124 mm. The Titan tractors ran on kerosene or a petrol-kerosene mixture.

The Titan range ranked among the best-selling tractors in North America in the 1910s and contributed significantly to the mechanisation of US agriculture, competing directly with International Harvester's own Mogul range as well as with Fordson and the early Case tractors.

On a used tractor from this early Titan range, the condition of the belt pulley and power take-off, the tightness of the cooling system and the large-displacement engines, corrosion on the frame and steel wheels, and the function of the belt clutch all count; since these are museum-grade pieces from the earliest days of tractor building, parts are practically only available within collector and restoration circles.

Sources: SpecCodex register, model data: Deering International Titan-Baureihe

Technical data

Engine

FuelKerosincorrect
Power20.3 hp (14.9 kW)correct
Rated speed575 rpmcorrect
Cylinders2correct
Displacement8,700 cm³correct
Bore165.1 mmcorrect
Stroke203.2 mmcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length3,734 mmcorrect
Width1,524 mmcorrect
Height1,695 mmcorrect
Wheelbase2,311 mmcorrect
Unladen weight2,589 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox2 V/1 Rcorrect
Front tyres36"x 6"correct
Rear tyres54"x 10"correct
Top speed6.6 km/hcorrect

Origin and approval

Units built78,363correct

Where this model stands

Power-to-weight ratio: 5.8 kW/t (15 kW / 2.6 t)

Power class: Compact (< 40 hp)

Stronger than 7% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Deering International TITAN 10-20 have?

The Deering International TITAN 10-20 delivers 20.3 hp.

How much does the Deering International TITAN 10-20 weigh?

The unladen weight is 2,589 kg.

What engine does the Deering International TITAN 10-20 have?

2 cylinders, 8,700 cm³ displacement, Kerosin.

How fast does the Deering International TITAN 10-20 go?

Top speed is 6.6 km/h.

What are the dimensions of the Deering International TITAN 10-20?

3,734 mm × 1,524 mm × 1,695 mm.

When was the Deering International TITAN 10-20 built?

Production years: 1915–1920.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 20 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare