Danson Aps Dk 3-AKSLET 30 T
Built: 2008 · Series: Other models
More machines from model year 2008
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Danson Aps Dk 3-AKSLET 30 T – EU class O4 trailer: 30,000 kg gross vehicle weight, 5,060 kg unladen weight, 6 wheels, built 2008
With a gross vehicle weight of 30,000 kg, the Danson 3-AKSLET 30 T falls into EU trailer class O4, the group of heavy trailers and semi-trailers above 10 tonnes operated in heavy haulage with their own air brake system. Vehicles like this run on several axles so the high gross weight spreads across permitted axle loads.
Read on 3 more paragraphs
The 3-AKSLET 30 T was built in 2008 and has an unladen weight of 5,060 kg; against a gross vehicle weight of 30,000 kg, that leaves a payload of 24,940 kg. It runs on 6 wheels at a width of 2,550 mm.
With roughly one-sixth unladen weight to five-sixths payload, the 3-AKSLET 30 T is built for high loads at a comparatively low weight of its own, as seen on simple platform or tipping semi-trailers for bulk goods. The air brake has to work evenly on every axle so the combination comes to a safe stop at full load.
When buying used, an air-braked trailer in this weight class lives or dies on the brake system: check lines, brake cylinders and linings on every axle for corrosion, leaks and wear. Inspect the chassis and frame for rust and cracks, along with axle bearings, suspension mounts, tyres and tread depth, lighting and the coupling to the towing vehicle. With a build year of 2008, also check the condition of the axle suspension and its mounting points after many years of heavy-haulage service.
Sources: SpecCodex-Register: Kennwerte des Modells Danson Aps Dk 3-AKSLET 30 T
Technical data
Dimensions and weights
| Width | 2,550 mmcorrect |
|---|---|
| Wheelbase | 580 mmcorrect |
| Unladen weight | 5,060 kgcorrect |
| Gross vehicle weight | 30,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Danson Aps Dk 3-AKSLET 30 T weigh?
The unladen weight is 5,060 kg.
What is the gross vehicle weight of the Danson Aps Dk 3-AKSLET 30 T?
30,000 kg.
Up to what speed is the Danson Aps Dk 3-AKSLET 30 T approved?
Approved up to 100 km/h.
When was the Danson Aps Dk 3-AKSLET 30 T built?
Production years: 2008.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
