Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › DAF › CF 370 FAN

DAF CF 370 FAN

Built: 2014-2024 · Series: CF

More machines from model year 2014

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the CF 370 FAN, DAF offers a model from the CF series. Production: 2014-2024. The engine delivers 270 kW, has 6 cylinders, with a displacement of 10,837 cm³. The machine is 11,900 mm long and 2,600 mm wide. The unladen weight is 21,965 kg. The wheelbase measures 7,500 mm. Top speed is 96 km/h. The gross vehicle weight is 29,000 kg. The machine runs on 8 wheels. The gearbox offers 9 gears. The CF series covers 248 models. Rated output within it ranges from 162 to 390 kW; the CF 370 FAN sits in the middle of that range with 270 kW. Its immediate neighbours are the CF 340 FA below it with 251 kW and the CF 370 above it with 271 kW. Unladen weight within it ranges from 7,240 to 30,409 kg; here the CF 370 FAN sits in the upper part of that range with 21,965 kg. 3352 DAF models across 109 series are on record.

DAF CF – medium-to-heavy series since 1998 between the LF and XF: three-digit horsepower number plus body codes FA/FT/FAN, in-line six-cylinder engines 6.7 to 12.9 litres, 162 to 390 kW

The CF replaced the older DAF 65/75/85 series in 1998 as the medium-to-heavy range between the lighter LF and the long-haul flagship XF; larger facelifts followed in 2013 and 2017. The type designation consists of the CF series and a three-digit number for engine output in horsepower (220 to 530 in the register), followed by codes for the body type – FA and FT denote tractor-unit or chassis variants, and FAN, FAR, FAS and FAG equipment or cab variants under DAF's factory nomenclature.

Read on 3 more paragraphs

The register lists 248 versions with 162 to 390 kW output, displacements of 6,693 to 12,907 cm³ across a consistent 6 cylinders (DAF's own PACCAR MX in-line engines), unladen weights of 6,851 to 36,560 kg, gross weights of 11,990 to 50,000 kg and lengths of 5,800 to 12,090 mm at 2,500 to 2,600 mm width.

Within DAF's range the CF covers everything from distribution work to long-haul and construction transport, competing with the Mercedes-Benz Actros/Antos, Scania P/G, Volvo FM and MAN TGM/TGS; DAF, part of PACCAR since 1996, has consistently used its own engines in the CF, Cummins-derived early on and later PACCAR units.

On used examples, check rust on the frame and air-suspension bellows, condition of the clutch and automated AS-Tronic gearbox, sealing of the cab mounting, the brake system including the retarder, and a documented service history through the DAF workshop network.

Sources: SpecCodex register, model data: DAF CF, DAF Trucks (manufacturer)

Technical data

Engine

Power270 kWcorrect
Cylinders6correct
Displacement10,837 cm³correct

Dimensions and weights

Length11,900 mmcorrect
Width2,600 mmcorrect
Wheelbase7,500 mmcorrect
Unladen weight21,965 kgcorrect
Gross vehicle weight29,000 kgcorrect

Drivetrain and chassis

Gears9correct
Wheels8correct
Top speed96 km/hcorrect

Where this model stands

Power-to-weight ratio: 12.3 kW/t (270 kW / 22 t)

Stronger than 46% of the trucks in the register — out of 25,241 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the DAF CF 370 FAN have?

The DAF CF 370 FAN delivers 270 kW.

How much does the DAF CF 370 FAN weigh?

The unladen weight is 21,965 kg.

What is the gross vehicle weight of the DAF CF 370 FAN?

29,000 kg.

What engine does the DAF CF 370 FAN have?

6 cylinders, 10,837 cm³ displacement.

How fast does the DAF CF 370 FAN go?

Top speed is 96 km/h.

What are the dimensions of the DAF CF 370 FAN?

11,900 mm × 2,600 mm.

When was the DAF CF 370 FAN built?

Production years: 2014-2024.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare