StartTractorsDaedong › EX40(CR)

Daedong EX40(CR) 4WD

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

As a tractor, the Daedong EX40(CR) belongs to the Daedong 4WD Tractor series. 42 hp (30.6 kW) is what the three-cylinder engine gets out of 2 litres. Rated power arrives at 2,600 rpm — the engine pulls from low down rather than needing to be revved.

It will not go faster than 27 km/h — a working pace, not a travelling one. Unladen, it tips the scales at 1,780 kg.

Within the range, rated power spans from 21.3 to 91.2 hp; with 41.6 hp, the EX40(CR) sits in the mid-field. Directly alongside are the EX35(CR) with 38.5 hp below and the DK451(C) with 45.6 hp above.

Technical data

Engine

Engine model4A200LXMcorrect
Power41.6 hp (30.6 kW)correct
Rated speed2,600 rpmcorrect
Cylinders3correct
Displacement1,999.2 cm³correct

Dimensions and weights

Ground clearance340.1correct
Unladen weight1,780 kgcorrect

Drivetrain and chassis

Gearbox typesynchroshuttlecorrect
Forward gears12correct
Reverse gears12correct
Tyre sizefront 8-16 rear 13.6-24correct
Top speed26.6 km/hcorrect

Working data

Pump flow64 l/mincorrect
Fuel tank capacity45 lcorrect

Other data

Height2,417.1correct

Where this model stands

Power-to-weight ratio: 17.2 kW/t (31 kW / 1.8 t)

Power class: Universal (40–100 hp)

Stronger than 28% of the tractors in the register — out of 15,240 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Daedong EX40(CR) have?

The Daedong EX40(CR) delivers 41.6 hp.

How much does the Daedong EX40(CR) weigh?

The unladen weight is 1,780 kg.

What engine does the Daedong EX40(CR) have?

3 cylinders, 1,999 cm³ displacement.

How fast does the Daedong EX40(CR) go?

Top speed is 26.6 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare