Daedong CK35 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Daedong CK35 is a tractor from the Daedong 4WD Tractor series. Power comes from a three-cylinder engine; from 1.6 litres it draws 34 hp (25.4 kW). With a rated speed of 2,600 rpm, it is built for pulling power, not for revving.
At 25 km/h, that is as fast as it goes. Empty, it weighs 1,475 kg.
Within the range, rated power spans from 21.3 to 91.2 hp; with 34.5 hp, the CK35 sits in the lower third. Directly alongside are the CK30 HST with 30.4 hp below and the EX35 HST with 38.5 hp above.
Technical data
Engine
| Engine model | 3A165LXDcorrect |
|---|---|
| Power | 34.5 hp (25.4 kW)correct |
| Rated speed | 2,600 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 1,646.9 cm³correct |
Dimensions and weights
| Ground clearance | 352correct |
|---|---|
| Unladen weight | 1,475 kgcorrect |
Drivetrain and chassis
| Gearbox type | synchroshuttlecorrect |
|---|---|
| Forward gears | 8correct |
| Reverse gears | 8correct |
| Tyre size | front 7-14 rear 11.2-24correct |
| Top speed | 24.8 km/hcorrect |
Working data
| Pump flow | 49.2 l/mincorrect |
|---|---|
| Fuel tank capacity | 30.3 lcorrect |
Other data
| Height | 2,392.7correct |
|---|
Where this model stands
Power-to-weight ratio: 17.2 kW/t (25 kW / 1.5 t)
Power class: Compact (< 40 hp)
Stronger than 21% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Daedong CK35 have?
The Daedong CK35 delivers 34.5 hp.
How much does the Daedong CK35 weigh?
The unladen weight is 1,475 kg.
What engine does the Daedong CK35 have?
3 cylinders, 1,647 cm³ displacement.
How fast does the Daedong CK35 go?
Top speed is 24.8 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.