Daedong CK30 HST 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a tractor, the Daedong CK30 HST belongs to the Daedong 4WD Tractor series. Under the bonnet works a three-cylinder engine displacing 1.5 litres, producing 30 hp (22.4 kW). Rated output is reached at 2,600 rpm, so it works in the lower rev range.
Top speed is 23 km/h. Unladen weight is 1,480 kg.
Within the range, rated power spans from 21.3 to 91.2 hp; with 30.4 hp, the CK30 HST sits in the lower third. Directly alongside are the LK3054 with 28.9 hp below and the CK35 with 34.5 hp above.
Technical data
Engine
| Engine model | 3A150LXDcorrect |
|---|---|
| Power | 30.4 hp (22.4 kW)correct |
| Rated speed | 2,600 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 1,499.4 cm³correct |
Dimensions and weights
| Ground clearance | 352correct |
|---|---|
| Unladen weight | 1,480 kgcorrect |
Drivetrain and chassis
| Gearbox type | hydrostatic transmission drivecorrect |
|---|---|
| Forward gears | 3correct |
| Tyre size | front 7-14 rear 11.2-24correct |
| Top speed | 22.9 km/hcorrect |
Working data
| Pump flow | 49.2 l/mincorrect |
|---|---|
| Fuel tank capacity | 30.3 lcorrect |
Other data
| Height | 2,392.7correct |
|---|
Where this model stands
Power-to-weight ratio: 15.1 kW/t (22 kW / 1.5 t)
Power class: Compact (< 40 hp)
Stronger than 19% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Daedong CK30 HST have?
The Daedong CK30 HST delivers 30.4 hp.
How much does the Daedong CK30 HST weigh?
The unladen weight is 1,480 kg.
What engine does the Daedong CK30 HST have?
3 cylinders, 1,499 cm³ displacement.
How fast does the Daedong CK30 HST go?
Top speed is 22.9 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.