Dacia LOGAN VAN PACK CONF.1.4
Built: 2010 · Series: LOGAN
More machines from model year 2010
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Dacia Logan – the collective page of Van and Pick-up versions based on the Logan, E4 (Euro 4) designation, 1.4 to 1.6 litres of displacement, four-cylinder, 1.1 to 1.2 tonnes unladen weight
Dacia, the Romanian brand founded in 1966, has belonged to the Renault Group since 1999 and launched the Logan in 2004 from the Mioveni plant near Piteşti as the world's first model of the low-cost strategy. This collective page gathers the commercial derivatives of the Logan – the two-seat van with panelled rear side windows and the pick-up with open load bed – registered as a commercial vehicle rather than a passenger car; the E4 designation refers to the Euro 4 emissions standard.
Read on 3 more paragraphs
The register lists here 9 versions with 1.4 to 1.6 litres of displacement from four-cylinders, unladen weights from 1,065 to 1,240 kg, gross weights from 1,890 to 2,000 kg and widths from 1,730 to 1,990 mm.
The Logan Van and Pick-up target trade businesses, courier services and municipalities seeking an affordable light commercial vehicle without a rear seat; commercial registration brings tax and insurance advantages in many European countries compared with the same body as a passenger car, which made the Logan a popular fleet choice in many countries.
On used examples, rust on the rear wheel arches and load bed, the condition of clutch and brakes, wear on the simple rear axle under load and, on diesel variants, the injector history count; parts are widely available through the Dacia and Renault dealer network.
Sources: SpecCodex register, model data: Dacia Logan, Dacia (Renault Group, Hersteller)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 1,390 cm³correct |
Dimensions and weights
| Width | 1,790 mmcorrect |
|---|---|
| Wheelbase | 2,910 mmcorrect |
| Unladen weight | 1,139 kgcorrect |
| Gross vehicle weight | 1,939 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 155 km/hcorrect |
Frequently asked questions
How much does the Dacia LOGAN VAN PACK CONF.1.4 weigh?
The unladen weight is 1,139 kg.
What is the gross vehicle weight of the Dacia LOGAN VAN PACK CONF.1.4?
1,939 kg.
What engine does the Dacia LOGAN VAN PACK CONF.1.4 have?
4 cylinders, 1,390 cm³ displacement.
When was the Dacia LOGAN VAN PACK CONF.1.4 built?
Production years: 2010.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
LOGAN
LOGAN 1.5 DCI 50KW PICK-UP E4
LOGAN 1.5 DCI 50KW VAN E4
LOGAN 1.6 64KW PICK-UP E4
LOGAN 1.6 64KW VAN E4
LOGAN PICK UP
LOGAN VAN
LOGAN VAN PACK
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
