Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › D Tec › F V 2006

D Tec F V 2006

Built: 1998 · Series: Other models

More machines from model year 1998

The photo shows the CTD-40-03D from the same series. Source: https://d-tec.eu/

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The D Tec F V 2006 is a machine built by D Tec. Production: 1998. The machine is 2,550 mm wide. The unladen weight is 8,440 kg. The wheelbase measures 739 mm. Top speed is 100 km/h. The gross vehicle weight is 47,500 kg. Unladen weight across the D Tec range ranges from 2,680 to 12,880 kg; the F V 2006 sits in the middle of that range with 8,440 kg. Its immediate neighbours are the SV2006 below it with 8,300 kg and the COMBITRAILER S-LINE CT-521-S above it with 8,444 kg. Gross vehicle weight across the D Tec range ranges from 18,000 to 62,000 kg; here the F V 2006 sits in the upper part of that range with 47,500 kg. 94 D Tec models across 2 series are on record.

D-tec – other models: the collective page of a Dutch maker of container chassis and extendable trailers from Dodewaard, 2,680 to 12,880 kg unladen weight, up to 62,000 kg gross weight

This page gathers the D-tec trailers the register could not assign to a named range. D-tec is a Dutch manufacturer based in Dodewaard that specialises in container chassis and extendable low-loader trailers; the model line-up includes container chassis and container tippers alongside the FlexTrailer and Flexliner ranges, whose load bed can be extended for over-length goods, as well as combi dollies for lengthening semi-trailer combinations. The type codes CT (Container Transport or Container Trailer) and CTD combined with axle count and load-capacity class denote the respective chassis variant; a complete scheme consistent across all model years cannot be reliably reconstructed from the model names in the register alone.

Read on 3 more paragraphs

The register lists here 76 versions with unladen weights from 2,680 to 12,880 kg, gross weights from 18,000 to 62,000 kg, lengths from 6,120 to 14,040 mm (for 52 models) and widths from 2,430 to 2,600 mm.

Container chassis and extendable trailers are core building blocks of port and intermodal logistics, in which swap bodies, sea containers and long unit loads such as pipes or precast elements move between terminals, plants and building sites; D-tec competes here with specialists such as Broshuis, Faymonville and Nooteboom.

On used container chassis, what counts is the condition of the twistlocks, frame condition and rust at the container support points, on extendable beds the ease of movement of the extension mechanism, plus the braking system, axles and tyres and an unbroken periodic-inspection history.

Sources: SpecCodex register, model data: D-tec, D-tec

Technical data

Dimensions and weights

Width2,550 mmcorrect
Wheelbase739 mmcorrect
Unladen weight8,440 kgcorrect
Gross vehicle weight47,500 kgcorrect

Drivetrain and chassis

Top speed100 km/hcorrect

Frequently asked questions

How much does the D Tec F V 2006 weigh?

The unladen weight is 8,440 kg.

What is the gross vehicle weight of the D Tec F V 2006?

47,500 kg.

Up to what speed is the D Tec F V 2006 approved?

Approved up to 100 km/h.

When was the D Tec F V 2006 built?

Production years: 1998.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare