Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Cztz › Other models › S-65 Staliniec

Cztz S-65 Staliniec

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The S-65 Staliniec comes from Cztz. The machine is 4,086 mm long, 2,416 mm wide and 2,151 mm high. The unladen weight is 11,200 kg. Top speed is 6.95 km/h. Drive: gąsienicowy. Unladen weight within this group ranges from 3 to 18,502,360 kg; the S-65 Staliniec sits at the bottom of that range with 11,200 kg. Its immediate neighbours are the FENDT 939 VARIO below it with 11,175 kg and the 8430 above it with 11,260 kg.

CZTZ – further models: the collective page for the S-60 Staliniec and S-65 Staliniec crawler tractors, 60 to 75 kW, unladen weight from 9.5 to 11.2 t

This page brings together the two crawler tractors listed in the register under CZTZ: the S-60 Staliniec and S-65 Staliniec. The Staliniec name denoted a range of Soviet crawler tractors built in large numbers as the S-60 and S-65.

Read on 3 more paragraphs

The register lists 2 versions here with 60 to 75 kW, unladen weights from 9,500 to 11,200 kg, lengths from 4,086 to 4,090 mm, widths from 2,395 to 2,416 mm and heights from 2,151 to 2,770 mm.

Crawler tractors in this weight class were used for heavy draught work in agriculture, forestry and earthmoving, where the large ground contact area of the tracks allowed lower ground pressure than wheeled tractors; machines of this type shaped the mechanisation of large-scale farms in Eastern Europe and Asia for decades. Surviving examples today are found mainly in agricultural technology museums and with private collectors who preserve the engineering history of Soviet crawler tractors.

For a used S-60 or S-65 Staliniec, the condition and tension of the tracks and rollers, the condition of the engine and cooling system, the tightness of the steering clutches and brakes, and wear on the gearbox and final drives are the key checks. Given the age of these machines, the condition of seals and gaskets throughout the drivetrain is worth close attention as well. Spare parts for these historic crawler tractors today run mainly through specialist vintage vehicle and tractor dealers.

Sources: SpecCodex register, model data: CZTZ (weitere Modelle), Staliniec S-60/S-65 (Wikipedia)

Technical data

Engine

EngineDiesel R4: 65–75 KMcorrect
Power75 (47, 8)correct

Dimensions and weights

Length4,086 mmcorrect
Width2,416 mmcorrect
Height2,151 mmcorrect
Unladen weight11,200 kgcorrect

Drivetrain and chassis

Drivegąsienicowycorrect
GearboxSchaltgetriebe, 3 Vorwärts- / 1 Rückwärtsgangcorrect
Top speed6.95 km/hcorrect

Where this model stands

Power-to-weight ratio: 6.7 kW/t (75 kW / 11.2 t)

Power class: Large (100–180 hp)

Stronger than 67% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much does the Cztz S-65 Staliniec weigh?

The unladen weight is 11,200 kg.

How fast does the Cztz S-65 Staliniec go?

Top speed is 7 km/h.

What are the dimensions of the Cztz S-65 Staliniec?

4,086 mm × 2,416 mm × 2,151 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikipedia (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare