Cuppers SA 2-2
Built: 1992-1996 · Series: SA
More machines from model year 1992
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Cuppers SA – trailer and semi-trailer range from the Dutch livestock-transport specialist in Lichtenvoorde: from the light 3,500 kg class to the 28-tonne semi-trailer
Cuppers Carrosserieën is a family business from Lichtenvoorde in the Achterhoek region (province of Gelderland) that has been building bodywork, trailers and semi-trailers for commercial vehicles of all makes since 1960, earning a particular reputation for building livestock trailers; the company is now run by the third generation of the family and ships its vehicles worldwide. The SA range spans from light trailers to multi-axle semi-trailers; model designations such as SA 2-2, SA 4+4, SA 5-5 L, SA 8-16 L or SA 10-18 L distinguish the individual sizes and equipment levels within this span.
Read on 3 more paragraphs
The register lists 15 versions of the Cuppers SA with kerb weights from 800 to 16,800 kg and gross vehicle weights from 3,500 to 28,000 kg. Lengths range from 9,560 to 14,370 mm, widths from 2,180 to 2,710 mm.
With this range the series covers both smaller operations running a single trailer and haulage firms running heavy semi-trailers for livestock and general cargo; Cuppers thus competes with numerous other trailer and semi-trailer builders in the Dutch-German border region.
On livestock trailers, ventilation, the floor and the partitions deserve particular attention for wear and hygiene condition; on the heavy semi-trailers, axles, brakes, air suspension and the frame should also be checked for corrosion and accident damage. Cuppers offers spare parts and repairs at its Lichtenvoorde site.
Sources: Kennwerte der Modelle Cuppers SA, Cuppers Carrosserieën (Hersteller)
Technical data
Dimensions and weights
| Width | 2,650 mmcorrect |
|---|---|
| Wheelbase | 610 mmcorrect |
| Unladen weight | 3,320 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Cuppers SA 2-2 weigh?
The unladen weight is 3,320 kg.
What is the gross vehicle weight of the Cuppers SA 2-2?
3,500 kg.
Up to what speed is the Cuppers SA 2-2 approved?
Approved up to 100 km/h.
When was the Cuppers SA 2-2 built?
Production years: 1992-1996.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
SA 10-10
SA 10-10 L
SA 10-10 L - VG
SA 10-10L
SA 10-16 L
SA 10-18
SA 10-18 L
SA 10-18L
SA 2-2 L
SA 4 4 B
SA 4 4 L
SA 4+4
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.