Cuppers LVO 12-24
Built: 1990-1991 · Series: LVO
More machines from model year 1990
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Cuppers LVO – range: trailers and semi-trailers with a capacity range in the type code, LVO 1.6-6.4 to LVO 12-27, unladen weight 2,960 to 13,660 kg, gross weight 8 to 39 tonnes
Cuppers' LVO range names its versions consistently by a number range that falls within the respective weight class: LVO 1.6-6.4 and LVO 8-8 denote lighter versions, LVO 12-18 to LVO 12-27 the heavier variants with a uniform first figure of 12; the AL and ASL suffixes distinguish further equipment variants within these types. The first figure in the range generally corresponds to the lower capacity limit, the second to the upper limit of that version.
Read on 3 more paragraphs
The register lists here 9 versions with unladen weights from 2,960 to 13,660 kg, gross weights from 8,000 to 39,000 kg, lengths from 8,150 to 14,050 mm and widths from 2,200 to 2,600 mm.
The range therefore covers both the class of medium-duty trailers up to 10 tonnes and heavy semi-trailers over 10 tonnes; the wide weight span within a single type designation points to a modular programme in which axle count and chassis length are matched to the desired capacity. The heavier types from LVO 12-18 with gross weights from 18 to 27 tonnes form the most densely populated group within the range.
On a used purchase, on the lighter LVO types the condition of the axles and the towing gear count, on the heavy semi-trailers additionally the kingpin housing and chassis torsion, and on all versions the brake system, the load area or side boards, and rust on load-bearing parts. On the lighter models, tyre and lighting condition are also worth checking, on the heavy ones wear on the brake linings.
Sources: SpecCodex register, model data: Cuppers LVO
Technical data
Dimensions and weights
| Length | 13,960 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Wheelbase | 9,560 mmcorrect |
| Unladen weight | 9,340 kgcorrect |
| Gross vehicle weight | 36,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Cuppers LVO 12-24 weigh?
The unladen weight is 9,340 kg.
What is the gross vehicle weight of the Cuppers LVO 12-24?
36,000 kg.
Up to what speed is the Cuppers LVO 12-24 approved?
Approved up to 100 km/h.
What are the dimensions of the Cuppers LVO 12-24?
13,960 mm × 2,500 mm.
When was the Cuppers LVO 12-24 built?
Production years: 1990-1991.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
LVO 1,6-6,4 AL
LVO 1.5-6.5 AL
LVO 12-18 ASL
LVO 12-20 ASL
LVO 12-24 ASL
LVO 12-27 AL
LVO 12-27 ASL
LVO 8-8 AL
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
