Cuppers LSDO 12-20 SL
Built: 2004 · Series: LSDO
More machines from model year 2004
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Cuppers LSDO – Dutch trailer range from 2.4 to 11.4 t unladen weight at 5.5 to 39 t gross weight, 8.45 to 14 m long, widths 2.2 to 2.55 m
This page gathers Cuppers's LSDO range, a Dutch maker of trailers for the commercial vehicle sector. The range spans the lighter LSDO 1.5-4 AL and 1.5-6.5 AL versions to the heavy LSDO 12-20 SL, 12-27 SL and 12-27L. Within a single range, Cuppers thus offers both light trailers for general tasks and heavy low-loaders for specialist work.
Read on 3 more paragraphs
The register lists here 5 versions with unladen weights from 2,400 to 11,440 kg at a gross weight of 5,500 to 39,000 kg, lengths from 8,450 to 14,000 mm and widths from 2,200 to 2,550 mm. The range therefore spans from vehicle class O3 into class O4.
The wide span from 5.5 to 39 t gross weight shows the breadth of the LSDO range, from lighter trailers to heavy low-loaders for construction machinery and indivisible loads. Cuppers aims the range at haulage firms and plant hire companies in the Dutch market; the longer, heavier versions suit tracked machines and other self-propelled equipment with a large turning circle in particular.
Buying used within this range, the points that matter are the condition of the chassis and axles, the function of the braking system, wear on the ramps or deck, and corrosion on load-bearing parts. On the heavy versions, also check the steering axles and the validity of the periodic roadworthiness test; spare parts run through the Cuppers dealer network.
Sources: SpecCodex register, model data: Cuppers LSDO
Technical data
Dimensions and weights
| Length | 11,280 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 7,810 mmcorrect |
| Unladen weight | 8,220 kgcorrect |
| Gross vehicle weight | 32,000 kgcorrect |
Drivetrain and chassis
| Wheels | 8correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Cuppers LSDO 12-20 SL weigh?
The unladen weight is 8,220 kg.
What is the gross vehicle weight of the Cuppers LSDO 12-20 SL?
32,000 kg.
Up to what speed is the Cuppers LSDO 12-20 SL approved?
Approved up to 100 km/h.
What are the dimensions of the Cuppers LSDO 12-20 SL?
11,280 mm × 2,550 mm.
When was the Cuppers LSDO 12-20 SL built?
Production years: 2004.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
