Crown RC 5530/35-35
Series: Crown Forklift
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a forklift truck, the Crown RC 5530/35-35 belongs to the Crown Forklift series.
It will not go faster than 12 km/h — a working pace, not a travelling one. Operating weight comes to 4,118 kg. It carries 1,588 kg.
Technical data
Engine
| Fuel | Elektrisch (36V)correct |
|---|
Dimensions and weights
| Width | 1,070 mmcorrect |
|---|---|
| Ground clearance | 76.2 mmcorrect |
| Unladen weight | 4,118.2 kgcorrect |
Drivetrain and chassis
| Tyre type | cushion tyrescorrect |
|---|---|
| Top speed | 11.6 km/hcorrect |
| Turning radius | 1,430 mmcorrect |
| Fork spread | 838.2 mmcorrect |
| Mast stages | 3correct |
Working data
| Lifting capacity | 1,587.6 kgcorrect |
|---|---|
| Lift height | 4,830 mmcorrect |
| Lowering speed | 27.4 m/mincorrect |
Other data
| Front wheels | 2correct |
|---|---|
| Lift speed | 18.3 m/mincorrect |
| Load centre | 609.6 mmcorrect |
| Mast tilt back | 5°correct |
| Mast tilt forward | 5°correct |
| Rear wheels | 2correct |
Frequently asked questions
How much does the Crown RC 5530/35-35 weigh?
The unladen weight is 4,118 kg.
How fast does the Crown RC 5530/35-35 go?
Top speed is 11.6 km/h.
What is the load capacity of the Crown RC 5530/35-35?
Load capacity is 1,588 kg at a 610 mm load centre, lift height 4,830 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
30TSP
40TS
FC 4010-40
FC 4010-50
FC 4020-40
FC 4020-50
FC 4020-55
FC 4020-60
FC 4040-50
FC 4040-55
FC 4040-60
FC 4510/15-40
Sources: [1]
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.