Crown RC 5510/15-30
Series: Crown Forklift
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Dimensions and weights
| Width | 1,070 mmcorrect |
|---|---|
| Ground clearance | 76.2 mmcorrect |
| Unladen weight | 3,778.4 kgcorrect |
Drivetrain and chassis
| Tyre type | cushion tyrescorrect |
|---|---|
| Top speed | 11.6 km/hcorrect |
| Turning radius | 1,310 mmcorrect |
Working data
| Lifting capacity | 1,360.8 kgcorrect |
|---|---|
| Lift height | 4,830 mmcorrect |
Other data
| Front wheels | 2correct |
|---|---|
| Gabelspreizung mm | 838.2 mmcorrect |
| Kraftstoffart | Electric 36Vcorrect |
| Lift speed | 19.8 m/mincorrect |
| Load centre | 609.6 mmcorrect |
| Mast stufen | 3correct |
| Mast tilt back | 3°correct |
| Mast tilt forward | 5°correct |
| Rear wheels | 2correct |
| Senkgeschwindigkeit mmin | 27.4 m/mincorrect |
Frequently asked questions
How much does the Crown RC 5510/15-30 weigh?
The unladen weight is 3,778 kg.
How fast does the Crown RC 5510/15-30 go?
Top speed is 11.6 km/h.
What is the load capacity of the Crown RC 5510/15-30?
Load capacity is 1,361 kg at a 610 mm load centre, lift height 4,830 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
30TSP
40TS
FC 4010-40
FC 4010-50
FC 4020-40
FC 4020-50
FC 4020-55
FC 4020-60
FC 4040-50
FC 4040-55
FC 4040-60
FC 4510/15-40
Sources: [1]
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.