Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › County › 1004

County 1004

Built: 1966–1975 · Series: 4WD-Tractor (Super 6)

More machines from model year 1966

Wikimedia Commons · CC BY-SA 2.0 · werktuigendagen · Dateiseite

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The County 1004 belongs to the 4WD-Tractor (Super 6) series; it rolled off the line as a tractor in 1966–1975. The six-cylinder engine produces 100 hp (74 kW). Drive type: four-wheel drive. The fuel is diesel.

Technical data

Engine

Fueldieselcorrect
Power100 hp (74 kW)correct
Cylinders6correct
DisplacementKraftstoffcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect

Other data

Diesel antrieb antriebstypall-wheel drivecorrect
Typen2703Ecorrect

Frequently asked questions

How much power does the County 1004 have?

The County 1004 delivers 100 hp.

What engine does the County 1004 have?

6 cylinders, Diesel.

When was the County 1004 built?

Production years: 1966–1975.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare