Concept Bergheim TBA 3500 XXL
Built: 2004-2005 · Series: Other models
More machines from model year 2004
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Concept Bergheim – other models: EU class O2 trailers with a gross weight of 1,300 to 3,500 kg, EB, TB and TBA ranges, unladen weights of 390 to 920 kg
This page gathers the Concept Bergheim trailers the register could not assign to a named range. Type designations such as EB 1800, TB 2000 and TBA 3500 each give a range and a number matching the gross weight in kilograms; the suffixes XL and XXL mark longer or taller body variants. Trailers in this class may remain unbraked up to a gross weight of 750 kg; above that, class O2 requires an overrun brake triggered by the telescoping drawbar, and they are usually towed on a category B licence, or category BE where the combination weight exceeds 3.5 tonnes.
Read on 3 more paragraphs
The register lists here 7 versions with unladen weights from 390 to 920 kg, gross weights from 1,300 to 3,500 kg and widths from 2,100 to 2,500 mm.
Trailers of this class are light general-purpose and transport trailers for trades, gardening and landscaping as well as private use, running braked or unbraked behind cars and light commercial vehicles; the seven versions on this page cover the entry-level range up to the 3.5 t limit that still allows towing with a standard car licence in most EU countries. The versions listed on this page show the range in which the maker operates outside its named model ranges.
On used trailers, axle and brake condition, rust on the frame and load bed, the overrun brake device, lighting and sides count; parts for axles, drawbars and couplings are, in this class, generally available across manufacturers. On the smaller, single-axle versions a 50 mm ball coupling usually suffices, while heavier models switch to a drawbar eye with pin coupling; the load on the coupling should match the towing vehicle's permitted value.
Sources: SpecCodex register, model data: Concept Bergheim
Technical data
Dimensions and weights
| Width | 2,500 mmcorrect |
|---|---|
| Wheelbase | 1,470 mmcorrect |
| Unladen weight | 920 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Concept Bergheim TBA 3500 XXL weigh?
The unladen weight is 920 kg.
What is the gross vehicle weight of the Concept Bergheim TBA 3500 XXL?
3,500 kg.
Up to what speed is the Concept Bergheim TBA 3500 XXL approved?
Approved up to 100 km/h.
When was the Concept Bergheim TBA 3500 XXL built?
Production years: 2004-2005.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
