Comear LIGHTAIL.1 – specifications
Built: 2022 · Series: Other models
The CO.ME.AR. LIGHTAIL.1 comes from Comear. Production: 2022. The engine has 4 cylinders, with a displacement of 1,950 cm³. The vehicle is 7,930 mm long and 2,300 mm wide. The unladen weight is 3,100 kg. The wheelbase measures 4,330 mm. The gross vehicle weight is 3,500 kg. The vehicle runs on 6 wheels. Unladen weight across the Comear range ranges from 2,399 to 3,100 kg; the CO.ME.AR. LIGHTAIL.1 sits at the top of that range with 3,100 kg. Its immediate neighbours are the HILUX below it with 2,849 kg. 8 Comear models across 2 series are on record.
Data for the version built 2022 · Data origin: Official register · sources
More machines from model year 2022
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Co.Me.Ar. Lightail.1 – a light chassis with six wheels: 2.0-litre four-cylinder, gross weight 3,500 kg, length 7,930 mm, built 2022
Co.Me.Ar. Lightail.1 is a light commercial vehicle that, with a gross vehicle weight of 3,500 kg, falls into class N1 and can be driven on a category B licence. Unusually for this weight class, it runs on six wheels instead of the usual four, pointing to an extra axle or twinned tyres for spreading the load.
Read on 3 more paragraphs
For this 2022 model the register lists a four-cylinder engine of 1,950 cm³. Kerb weight is 3,100 kg, gross vehicle weight 3,500 kg. The vehicle is 7,930 mm long, 2,300 mm wide, with a wheelbase of 4,330 mm.
At 7,930 mm long with a gross vehicle weight of only 3,500 kg and six wheels, the vehicle is built for a long but light load area, typical of car-transporter or recovery vehicles with a tilting or sliding platform that aim to stay within the 3.5-tonne limit for a category B licence despite their considerable length. Between kerb and gross weight only around 400 kg of payload remains, underlining a design built for length rather than high load capacity.
For a used example, check the condition and guidance of the extra axle or twinned tyres, wear on any tilting or sliding mechanism of the load platform, brake system operation on all wheels, and frame distortion from the long build. Drivetrain parts run through independent commercial workshops, while platform parts come through the respective body builder.
Sources: SpecCodex-Register: Kennwerte des Modells Co.Me.Ar. Lightail.1
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 1,950 cm³correct |
Dimensions and weights
| Length | 7,930 mmcorrect |
|---|---|
| Width | 2,300 mmcorrect |
| Wheelbase | 4,330 mmcorrect |
| Unladen weight | 3,100 kg (example vehicle as registered, incl. body – not a model value)correct |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|
Frequently asked questions
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.