Cnh Steyr 9085 MT
Built: 2008 · Series: 9085 MT-Reihe
More machines from model year 2008
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Steyr 9085 MT (2008): four-cylinder diesel with 4,397 cm³ for diesel and rapeseed-oil fuel, 63 kW, a weight of 4,180 kg and a 40 km/h top speed
The Steyr 9085 MT range, also built in St. Valentin, Austria, belongs to the manufacturer's mid-range within the CNH group. The 9085 MT was built in 2008 as a version of this range in its own right, alongside other four-cylinder Steyr models of the period.
Read on 3 more paragraphs
The Steyr 9085 MT carries a water-cooled four-cylinder diesel engine with 4,397 cm³ of displacement, producing 86 hp, or 63 kW, at 2,300 rpm, and built for both diesel and rapeseed-oil diesel. At 4,180 kg, 4,215 mm long, 2,730 mm high, 2,170 mm wide and with a 2,481 mm wheelbase, the machine reaches a top speed of 40 km/h.
With the same displacement as other four-cylinder engines in this Steyr range but its own tuning of power and weight, the 9085 MT is built for versatile field work on medium-sized farms. Its rapeseed-oil capability allows running on home-produced plant oil, as practised in parts of Austrian and southern German farming. At 4,180 kg, the machine stays light enough for work on soft or waterlogged fields, where a heavier standard tractor would sink into the ground.
When buying a rapeseed-oil-capable engine used, the condition of the injection system and fuel filters matters, since plant oil places different demands on seals than pure diesel. Also worth checking are the tightness of the hydraulic connections for implements, the condition of the clutch, and corrosion damage to the frame and mudguards.
Sources: SpecCodex-Register: Kennwerte des Modells Steyr 9085 MT, Steyr (manufacturer)
Technical data
Engine
| Fuel | Diesel/Rapsdieselcorrect |
|---|---|
| Power | 86 hp (63 kW)correct |
| Rated speed | 2,300 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 4,397 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,215 mmcorrect |
|---|---|
| Width | 2,170 mmcorrect |
| Height | 2,730 mmcorrect |
| Wheelbase | 2,481 mmcorrect |
| Unladen weight | 4,180 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 16V / 8Rcorrect |
| Front tyres | 14.9R24correct |
| Rear tyres | 18.4R34correct |
| Top speed | 40 km/hcorrect |
Where this model stands
Power-to-weight ratio: 15.1 kW/t (63 kW / 4.2 t)
Power class: Universal (40–100 hp)
Stronger than 58% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Cnh Steyr 9085 MT have?
The Cnh Steyr 9085 MT delivers 86 hp.
How much does the Cnh Steyr 9085 MT weigh?
The unladen weight is 4,180 kg.
What engine does the Cnh Steyr 9085 MT have?
4 cylinders, 4,397 cm³ displacement, Diesel/Rapsdiesel.
How fast does the Cnh Steyr 9085 MT go?
Top speed is 40 km/h.
What are the dimensions of the Cnh Steyr 9085 MT?
4,215 mm × 2,170 mm × 2,730 mm.
When was the Cnh Steyr 9085 MT built?
Production years: 2008.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 17 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
