Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Cnh Steyr › 9000 MT › 9105 MT

Cnh Steyr 9105 MT

Built: 2008–2014 · Series: 9000 MT

More machines from model year 2008

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 9000 MT series from Cnh Steyr includes the 9105 MT. Production: 2008–2014. The engine delivers 101 hp (74.5 kW), has 4 cylinders, with a displacement of 4,397 cm³. Rated speed is 2,300 rpm. The machine is 4,215 mm long, 2,170 mm wide and 2,730 mm high. The unladen weight is 4,180 kg. The wheelbase measures 2,481 mm. Top speed is 40 km/h. Transmission: 16V / 8R. The engine is water-cooled. Tyres: front 14.9R24, rear 18.4R34. The fuel is Diesel/Rapsdiesel. Rated output across the Cnh Steyr range ranges from 65 to 240 hp; the 9105 MT sits in the lower part of that range with 101 hp. Its immediate neighbours are the 4095 Multi below it with 99 hp and the 4120 Profi above it with 121 hp. Rated output across the Cnh Steyr range ranges from 48 to 176 kW; here the 9105 MT sits in the lower part of that range with 74.5 kW. 28 Cnh Steyr models across 14 series are on record.

CNH Steyr 9000 MT – the next power step of the four-cylinder range: 9095 MT and 9105 MT, 68 to 74.5 kW from 4,397 cc, kerb weight 4,180 kg, approved for rapeseed diesel

The 9000 MT range continues Steyr's four-cylinder line at the next power step up, with the 9095 MT and 9105 MT as closely spaced variants of the same 4,397 cc block; the MT suffix sets these models apart from the more simply equipped variants. Like the smaller Kompakt range, this four-cylinder is built at Steyr's St. Valentin plant and shares technical components with Case IH.

Read on 3 more paragraphs

The register lists 2 variants at 68 to 74.5 kW from a four-cylinder diesel of 4,397 cc, a kerb weight of 4,180 kg, a length of 4,215 mm, a width of 2,170 mm, a height of 2,730 mm and a rated 2,300 rpm; both models are approved for rapeseed diesel.

At around 90 to 100 hp, the MT range reached into output bands sought after on mixed arable farms and in municipal work, competing there with comparable models from Deutz-Fahr, Fendt and New Holland.

Buying this four-cylinder tractor, the condition of the injection pump matters, along with the tightness of the hydraulic system, wear on the clutch and gearbox, and, given the rapeseed-diesel approval, the state of fuel lines and seals, which are more sensitive to biofuel than to plain diesel; parts run through the CNH network, including wear items for the clutch and hydraulic rams, and on both models the rapeseed-diesel-rated fuel lines and their fittings are worth a check too.

Sources: SpecCodex register, model data: CNH Steyr 9000 MT, Steyr (manufacturer)

Technical data

Engine

FuelDiesel/Rapsdieselcorrect
Power101 hp (74.5 kW)correct
Rated speed2,300 rpmcorrect
Cylinders4correct
Displacement4,397 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length4,215 mmcorrect
Width2,170 mmcorrect
Height2,730 mmcorrect
Wheelbase2,481 mmcorrect
Unladen weight4,180 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox16V / 8Rcorrect
Front tyres14.9R24correct
Rear tyres18.4R34correct
Top speed40 km/hcorrect

Where this model stands

Power-to-weight ratio: 17.8 kW/t (74 kW / 4.2 t)

Power class: Large (100–180 hp)

Stronger than 67% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Cnh Steyr 9105 MT have?

The Cnh Steyr 9105 MT delivers 101 hp.

How much does the Cnh Steyr 9105 MT weigh?

The unladen weight is 4,180 kg.

What engine does the Cnh Steyr 9105 MT have?

4 cylinders, 4,397 cm³ displacement, Diesel/Rapsdiesel.

How fast does the Cnh Steyr 9105 MT go?

Top speed is 40 km/h.

What are the dimensions of the Cnh Steyr 9105 MT?

4,215 mm × 2,170 mm × 2,730 mm.

When was the Cnh Steyr 9105 MT built?

Production years: 2008–2014.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 17 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare